Hunter 23921 Owner's Manual - Page 12

7 • Completing Your Installation With a Bowl Light Fixture (Continued) Installing the Glass Bowl 7-13. First install B10 candelabra bulbs (60 Watt Maximum) into the sockets. 7-14. Attach the extra pull chain (included) to the fan pull chain using the plastic breakaway connector. (You may find the plastic breakaway connector on the end of the extra chain.) 7-15. Thread the fan pull chain (coming from the side of the light kit) down through the closest hole in the metal disc. Then, thread the fan chain through the bottom of the glass bowl, and finally through the grommet hole in the cover plate. 7-16. Thread the light pull chain (coming from the center of the light kit) through the bottom of the glass bowl and the center of the cover plate. 7-17. Place the cover plate up against the glass bowl. Align the holes in the cover plate and glass bowl. 7-18. Thread the light pull chain through the center of the finial. 7-19. Screw the finial onto the threaded rod end until tight. 7-20. Attach the extra pull chain (included) to the light pull chain using the plastic breakaway connector. (You may find the plastic breakaway connector on the end of the extra chain.) Fan Pull Chain Breakaway Connector Note: In compliance with US federal energy regulations, this ceiling fan contains a device that restricts the light kit to a maximum of 190 Watts. Exceeding that limit or the marked limit on this product may result in fire hazard or improper operation. Light Bulbs (B10 Candelabra Base 60 Watt Maximum) Metal Disc Threaded Rod Light Pull Chain Glass Bowl 12 42786-01 • 08/14/09 • Hunter Fan Company Cover Plate Finial