Husqvarna 3120 XP Owners Manual - Page 16
How To Avoid Kickback, What Is Kickback?, Do Not Tackle Any Job You Are Unsure - how much work
View all Husqvarna 3120 XP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
H Bar Check regularly: • Whether there are burrs on the edges of the bar. Remove these with a file if necessary. • Whether the groove in the bar has become badly worn. Replace the bar if necessary. SAFETY INSTRUCTIONS HOW TO AVOID KICKBACK Kickback can happen very suddenly and violently; kicking the saw, bar and chain back at the user. If this happens when the chain is moving it can cause very serious, even fatal injuries. It is vital you understand what causes kickback and that you can avoid it by taking care and using the right working technique. What is kickback? The word kickback is used to describe the sudden reaction that happens when the upper quadrant of the tip of the bar (known as the "kickback zone") touches an object and the saw is kicked backwards. • Whether the tip of the bar is uneven or badly worn. If a hollow forms on one side of the bar tip this is due to a slack chain. • To prolong the life of the bar you should turn it over daily. Kickback always occurs in the cutting plane of the saw. Normally the saw and bar are thrown backwards and upwards towards the user. However the saw may move in a different direction depending on the way it was being used when the kickback zone of the bar touched the object. MOST CHAIN SAW ACCIDENTS HAPPEN WHEN THE CHAIN TOUCHES THE OPERATOR. • WEAR PERSONAL PROTECTIVE EQUIPMENT (see the section on "Chain saw safety equipment"). • DO NOT TACKLE ANY JOB YOU ARE UNSURE OF (see the section on "Personal protective equipment", "How to avoid kickback", "General working instructions" and "Cutting equipment"). • AVOID SITUATIONS WHERE THERE IS A RISK OF KICKBACK (see the section on "Personal protective equipment"). • USE THE RECOMMENDED PROTECTIVE EQUIPMENT AND CHECK ITS CONDITION (see section on "General working instructions"). • CHECK THAT ALL SAFETY FUNCTIONS ARE WORKING (see section on "General working instructions" and "General safety precautions"). Kickback only occurs if the kickback zone of the bar touches an object. 16 - English