Husqvarna 3120 XP Owners Manual - Page 34

Engine Cylinder volume, cu.in/cm3 Cylinder bore, inch/mm Stroke, inch/mm Idle speed, rpm Power, kW/ rpm Ignition system Manufacture Type of ignition system Spark plug Electrode gap, inch/mm Fuel and lubrication system Manufacturer Carburetor type Fuel capacity, US pint/litre Oil pump capacity at 8 500 rpm, ml/min Oil capacity, US pint/litre Type of oil pump Weight Without bar and chain, Lbs/kg Chain/bar Standard bar length, inches/cm Recommended bar lengths, inches/cm Usable cutting length inches/cm Chain speed at max. power, m/sec Pitch, inch/mm Thickness of drive link, inch/mm Number of teeth on drive sprocket TECHNICAL DATA 3120XP 7,25/119 2,3/60 1,65/42 2 500 6,2/ 9 000 Recommended original and replacement bar and chain combinations This Husqvarna saw model is in the ANSI category of saws above 3,8 cu. in. and is not required to comply with low kickback performance requirements. However, for the Husqvarna chain saw model 3120XP we recommend the following cutting equipment. SEM CD Champion RCJ 7Y 0,020/0,5 Guide bar Length Pitch Max nose inch inch radius Saw chain 24-42 0,404 ATL 1,65" Husqvarna H64 or Oregon 27 ATL is the Oregon designation of Armour Tip Large hard nose bar. Walbro WG 7 2,4/1,25 28-51 1,45/0,7 Automatic/Manual for extra oil flow 22,9/10,4 The combinations of powerhead, bar and chain have been investigated in accordance with the vibration requirements of ANSI B 175.1-1991. ! WARNING! This chain saw model is capable of severe kickback that could result in serious injuries to the user. Do not operate this saw unless you have extraordinary cutting needs and experience and specialized training for dealing with kickback. Saws with significantly reduced kickback potential are available. Always use the safest saw and cutting equipment applicable to your cutting need. 24"/60 24-42"/60-107 23-42"/57-106 20,1 0,404"/ 10,26 0,063/1,6 7 34 - English ´*32o¶50¨