Husqvarna 3120 XP Owners Manual - Page 3

CONTENTS, Federal Emission Control - needle settings

Page 3 highlights

CONTENTS Before using a new saw • Read the instructions carefully. • Check cutting equipment is correctly fitted and adjusted. See page 25. • Refuel and start the saw. Check the carburetor settings. See pages 26-29. • Do not use the saw until sufficient chain oil has reached the chain, see page 14. IMPORTANT! If the carburetor mixture is too lean it greatly increases the risk of engine failure. Poor maintenance of the air filter will cause carbon build-up on the spark plug and lead to difficult starting. If the chain is badly adjusted it will cause increased wear or damage to the bar, drive sprocket and chain. Maintenance, replacement, or repair of the emission control devices and systems may be performed by any nonroad engine repair establishment or individual. ! WARNING! Under no circumstances may the design of the machine be modified without the permission of the manufacturer. Always use genuine spare parts/accessories. Non-authorized modifications and/or accessories can result in serious personal injury or the death of the operator or others. Your warranty does not cover damage or liability caused by the use of non-authorized accessories or replacement parts. You will find the following labels on your chain saw: Contents Key to symbols 2 Safety instructions Personal protective equipment 4 Chain saw safety equipment 4 Inspecting, maintaining and servicing chain saw safety equipment 8 Cutting equipment 10 How to avoid kickback 16 General safety precautions 18 General working instructions 19 What is what? What is what 24 Assembly Mounting guide bar and chain 25 Fuel handling Fuelmix 26 Fuelling 27 Start and stop Start and stop 28 Maintenance Carburetor 29 Starter device 30 Air filter 31 Spark plug 31 Muffler 31 Needle bearing maintenance 31 Adjustment of the oil pump 32 Extra chain oil 32 Cooling system 32 Daily maintenance 33 Weekly maintenance 33 Monthly maintenance 33 Technical data 3120XP 34 Federal Emission Control Warranty Statement Your warranty rights and obligations 35 3 English -

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36

English –
3
CONTENTS
Contents
Key to symbols
.........................................................
2
Safety instructions
Personal protective equipment
.................................
4
Chain saw safety equipment
......................................
4
Inspecting, maintaining and servicing chain saw safety
equipment
............................................................................
8
Cutting equipment
.........................................................
10
How to avoid kickback
.................................................
16
General safety precautions
.......................................
18
General working instructions
....................................
19
What is what?
What is what?
....................................................................
24
Assembly
Mounting guide bar and chain
...........................................
25
Fuel handling
Fuelmix
..............................................................................
26
Fuelling
..............................................................................
27
Start and stop
Start and stop
....................................................................
28
Maintenance
Carburetor
.........................................................................
29
Starter device
....................................................................
30
Air filter
..............................................................................
31
Spark plug
.........................................................................
31
Muffler
................................................................................
31
Needle bearing maintenance
............................................
31
Adjustment of the oil pump
................................................
32
Extra chain oil
....................................................................
32
Cooling system
..................................................................
32
Daily maintenance
.............................................................
33
Weekly maintenance
.........................................................
33
Monthly maintenance
........................................................
33
Technical data
3120XP
..............................................................................
34
Federal Emission Control
Warranty Statement
Your warranty rights and obligations
.................................
35
Before using a new saw
Read the instructions carefully.
Check cutting equipment is correctly fitted and adjusted.
See page 25.
Refuel and start the saw. Check the carburetor settings.
See pages 26-29.
Do not use the saw until sufficient chain oil has reached the
chain, see page 14.
IMPORTANT! If the carburetor mixture is too lean it greatly
increases the risk of engine failure.
Poor maintenance of the air filter will cause carbon build-up on
the spark plug and lead to difficult starting.
If the chain is badly adjusted it will cause increased wear or
damage to the bar, drive sprocket and chain.
Maintenance, replacement, or repair of the emission control
devices and systems may be performed by any nonroad
engine repair establishment or individual.
You will find the following labels
on your chain saw:
WARNING!
Under no circumstances may the design of
the machine be modified without the permis-
sion of the manufacturer. Always use genuine
spare parts/accessories. Non-authorized
modifications and/or accessories can result
in serious personal injury or the death of the
operator or others.
Your warranty does not cover damage or
liability caused by the use of non-authorized
accessories or replacement parts.
!