Husqvarna 525P4S Operation Manual
Husqvarna 525P4S Manual
 |
View all Husqvarna 525P4S manuals
Add to My Manuals
Save this manual to your list of manuals |
Husqvarna 525P4S manual content summary:
- Husqvarna 525P4S | Operation Manual - Page 1
Operator′s manual 525P4S 525P5S Please read the operator's manual carefully and make sure you understand the instructions before using the machine. English - Husqvarna 525P4S | Operation Manual - Page 2
or others. It is extremely important that you read and understand the contents of the operator's manual. Please read the operator's manual carefully and make sure you understand the instructions before using the machine. Always wear: • Wear a protective helmet where there is a risk of falling - Husqvarna 525P4S | Operation Manual - Page 3
and stopping 19 WORKING TECHNIQUES General working instructions 21 MAINTENANCE Carburettor 24 Muffler 24 starting: Please read the operator's manual carefully. WARNING! Long-term exposure death of the operator or others. WARNING! A pole saw is a dangerous ! tool if used carelessly or - Husqvarna 525P4S | Operation Manual - Page 4
. By following its content (usage, service, maintenance, etc), the life span and the second-hand value of the machine can be extended. If you sell this machine, make sure that the operator′s manual is passed on to the buyer. Thank you for using a Husqvarna product. Husqvarna AB has a policy of - Husqvarna 525P4S | Operation Manual - Page 5
14 Protective guard for saw chain 15 Bar nut 16 Saw chain 17 Guide bar 18 Chain tensioning screw 19 Chain oil tank 20 Filling with chain oil 21 Operator′s manual 22 Transport guard, bar 23 Allen key 24 Combination spanner 25 Combination spanner Chain tensioner 26 Harness 525P5S 27 Harness 525P4S 28 - Husqvarna 525P4S | Operation Manual - Page 6
service instructions described in this manual. Some maintenance and service measures must be carried out by trained and qualified specialists. See instructions death due to asphyxiation or carbon monoxide poisoning. IMPORTANT! A pole saw is a dangerous tool if used carelessly or incorrectly and can - Husqvarna 525P4S | Operation Manual - Page 7
section. If your machine fails any of these checks contact your service agent to get it repaired. Throttle trigger lockout The throttle throttle lockout move freely and that the return springs work properly. See instructions under the heading Start. Start the machine and apply full throttle. - Husqvarna 525P4S | Operation Manual - Page 8
hands or wrists. The risk increases at low temperatures. Muffler For mufflers it is very important that you follow the instructions on checking, maintaining and servicing your machine. Never use a machine that has a faulty muffler. Regularly check that the muffler is securely attached to the machine - Husqvarna 525P4S | Operation Manual - Page 9
properly sharpened! Follow our instructions and use the recommended fi correct raker clearance! Follow our instructions and use the recommended raker gauge of these checks contact your service agent to get it repaired. it. Specification of bar and saw chain When the cutting attachment supplied with - Husqvarna 525P4S | Operation Manual - Page 10
teeth • Lubrication hole and hole for the chain tensioner. Saw chain • Saw chain pitch (inches). (The distance between three drive links, eats its way through the wood and produces long, thick cuttings. • The cutting part of the chain is called the cutting link and this consists of a cutting tooth - Husqvarna 525P4S | Operation Manual - Page 11
File all the teeth on one side of the bar first. Then turn the saw over and file the remaining teeth from the other side. It is very dif advice on setting raker clearance WARNING! Departure from the ! sharpening instructions considerably increases the risk of kickback. • When you sharpen the - Husqvarna 525P4S | Operation Manual - Page 12
clearance you will need a flat file and a raker gauge. - Undo the bar nut. • Place the gauge over the raker lip. • Place the file over the part of the lip that protrudes through the gauge and file off the excess. The clearance is correct when you no longer feel any resistance as - Husqvarna 525P4S | Operation Manual - Page 13
oil in the oil tank when filling the fuel to prevent damage to the saw chain and bar that may arise due to a lack of lubrication. • Check not working after carrying out the above checks you should contact your service workshop. Checking chain lubrication • Check the chain lubrication each time you - Husqvarna 525P4S | Operation Manual - Page 14
SAFETY PRECAUTIONS Checking wear on cutting equipment Saw chain • Whether the tip of the bar drive sprocket Regularly check the degree of wear on the drive sprocket. Replace if wear is excessive. Guide bar Check regularly: • Whether there are burrs on the edges of the bar. Remove these with - Husqvarna 525P4S | Operation Manual - Page 15
the risk of fatigue in your arms and back. • Put on the harness. • Hook the machine onto the harness support hook. • Adjust the length of the harness so that the support hook is roughly level with your right hip. Tension the chain by turning the chain tensioning screw clockwise. Use a combination - Husqvarna 525P4S | Operation Manual - Page 16
the bar head Dismantling: Loosen the coupling by turning the knob (at least 3 times). • Fill with Husqvarna saw chain oil. • Refit the cap. Assembling and dismantling the two-piece shaft 525P5S • Push and hold the button (C). While securely holding the engine end, pull the attachment straight out - Husqvarna 525P4S | Operation Manual - Page 17
or your clothes, change your clothes. Wash any part of your body that has come in contact with fuel lines. In the event of leakage, contact your service agent. Transport and storage • Store and transport the • For best results and performance use HUSQVARNA two-stroke engine oil, which is specially - Husqvarna 525P4S | Operation Manual - Page 18
it. Wipe off the spillage and allow remaining fuel to evaporate. • Clean the area around the fuel cap. Contamination in the tank can cause operating problems. • Ensure that the fuel is well mixed by shaking the container before filling the tank. 18 - English - Husqvarna 525P4S | Operation Manual - Page 19
safety features are in good working order. Never use a machine that lacks a part or has been modified outside its specifications. Filling with oil WARNING! fill the bulb. The bulb need not be completely filled. • Fill with Husqvarna saw chain oil. • Refit the cap. Choke: Set the choke control in the - Husqvarna 525P4S | Operation Manual - Page 20
unintentional starting, the spark plug cap must be removed from the spark plug when assembling, checking and/or performing maintenance. CAUTION! Do not put any part of your body in marked area. Contact can result in burns to the skin, or electrical shock if the spark plug cap has been damaged - Husqvarna 525P4S | Operation Manual - Page 21
instructions IMPORTANT! This section takes up the basic safety precautions for working with a pole saw. If you encounter a situation where you are uncertain how to proceed you should ask an expert. Contact your dealer or your service ground. • Use the harness to support the weight of the machine and - Husqvarna 525P4S | Operation Manual - Page 22
power lines it could lead to death or serious bodily injury. Safety instructions after completing work • Let the engine drop back to idle speed original spare parts for repairs. Basic working techniques • Hold the machine as close to your body as possible to get the best balance. 525P5S WARNING! - Husqvarna 525P4S | Operation Manual - Page 23
. • Cut large branches in sections so that you have better control over where they fall. • Use the harness to support the weight of the machine and make it easier to handle. 525P5S 525P4S • Never cut through the swelling at the root of the branch as this will slow down healing and increase - Husqvarna 525P4S | Operation Manual - Page 24
! adjusted so that the cutting attachment stops, contact your dealer/service workshop. Do not use the machine until it has been correctly to overheat and result in damage to the cylinder and piston. See instructions under the Maintenance heading. CAUTION! Never use a machine with a defective - Husqvarna 525P4S | Operation Manual - Page 25
the spark plug electrodes, which may result in operating problems and starting difficulties. If the machine is low service on the saw head must be carried out by an authorized Husqvarna dealer. Always use Husqvarna's original grease to prevent damage to the gear in the saw head. Use grease with part - Husqvarna 525P4S | Operation Manual - Page 26
maintenance and service work described in this Operator's Manual. More extensive work must be carried out by an authorized service workshop. under the protective cover. X Check the saw chain with regard to visible cracks in the rivets and links, whether the saw chain is stiff or whether the rivets - Husqvarna 525P4S | Operation Manual - Page 27
(A): 91 Vibration levels (see note 2) Equivalent vibration levels (ahv,eq) at handles, measured according to EN ISO 22867, m/s2 Front/rear handles: 2,9/3,2 525P5S 25,4 34 28 11000-12000 2800-3000 1,0/8500 Yes Yes NGK BPMR8Y 0,65 0,5 0,14 6,4 107 90 3,4/3,7 Note 1: Reported data for the noise - Husqvarna 525P4S | Operation Manual - Page 28
drive links (no.) 40 45 EC Declaration of Conformity (Applies to Europe only) Husqvarna AB, SE561 82 Huskvarna, Sweden, tel +46-36-146500, declares under sole responsibility that the pole saws Husqvarna 525P4S and 525P5S with serial numbers dating 2016 and onwards (the year is clearly stated on the - Husqvarna 525P4S | Operation Manual - Page 29
- Husqvarna 525P4S | Operation Manual - Page 30
Original instructions 1157425-26 ´´®®zz++YYJJTT¶¶66yy¨¨ 2016-05-02
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
 |
 |
English
525P4S 525P5S
Oper
ator
′
s manual
Please r
ead the operator’s manual carefully and make sure you understand the instructions
before using the machine.