Husqvarna 525P4S Operation Manual - Page 14
Checking wear on cutting equipment, Saw chain, Chain drive sprocket, Guide bar
View all Husqvarna 525P4S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
GENERAL SAFETY PRECAUTIONS Checking wear on cutting equipment Saw chain • Whether the tip of the bar is uneven or badly worn. If a hollow forms on the underside of the bar tip this is due to running with a slack chain. Check the chain daily for: • Visible cracks in rivets and links. • Whether the chain is stiff. • Whether rivets and links are badly worn. • To prolong the life of the bar you should turn it over daily. We recommend you compare the existing chain with a new chain to decide how badly the existing chain is worn. When the length of the cutting teeth has worn down to only 4 mm the chain must be replaced. WARNING! A faulty cutting attachment ! may increase the risk of accidents. Chain drive sprocket Regularly check the degree of wear on the drive sprocket. Replace if wear is excessive. Guide bar Check regularly: • Whether there are burrs on the edges of the bar. Remove these with a file if necessary. • Whether the groove in the bar has become badly worn. Replace the bar if necessary. 14 - English