Husqvarna 525P4S Operation Manual - Page 23
WARNING! Never activate the throttle, without having the cutting attachment in, full view., 525P5S
View all Husqvarna 525P4S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
WORKING TECHNIQUES • Do not work with the shaft held straight out in front of you (like a fishing rod) as this increases the apparent weight of the cutting attachment. and cause permanent damage to the tree. The cut should not be deeper than 1/3 of the branch thickness to prevent jamming. Keep the chain running while you withdraw the cutting attachment from the branch to prevent it jamming. • Cut large branches in sections so that you have better control over where they fall. • Use the harness to support the weight of the machine and make it easier to handle. 525P5S 525P4S • Never cut through the swelling at the root of the branch as this will slow down healing and increase the risk of fungal attack! • Make sure you have a firm footing and that you can work without being hampered by branches, stones and trees. WARNING! Never activate the throttle ! without having the cutting attachment in full view. • Use the stop at the base of the cutting head to provide support during cutting. This will help prevent the cutting attachment from "jumping" on the branch. • Make an initial cut on the underside of the branch before cutting through the branch. This will prevent tearing of the bark, which could lead to slow healing English - 23