Husqvarna 525P4S Operation Manual - Page 2

Symbols WARNING! The machine can be a dangerous tool if used incorrectly or carelessly, which can cause serious or fatal injury to the operator or others. It is extremely important that you read and understand the contents of the operator's manual. Please read the operator's manual carefully and make sure you understand the instructions before using the machine. Always wear: • Wear a protective helmet where there is a risk of falling objects • Approved hearing protection • Protective goggles or a visor This product is in accordance with applicable EC directives. KEY TO SYMBOLS Wear sturdy, non-slip boots. Choke control Primer bulb Other symbols/decals on the machine refer to special certification requirements for certain markets. The engine is switched off by moving the stop switch to the stop position. CAUTION! The stop switch automatically returns to the start position. In order to prevent unintentional starting, the spark plug cap must be removed from the spark plug when assembling, checking and/or performing maintenance. Noise emission to the environment according to the European Community's Directive. The machine's emission is specified in the Technical data chapter and on the label. Always wear approved protective gloves. Regular cleaning is required. This machine is not electrically insulated. If the machine touches or comes close to highvoltage power lines it could lead to death or serious bodily injury. Electricity can jump from one point to another by arcing. The higher the voltage, the greater the distance electricity can jump. Electricity can also travel through branches and other objects, especially if they are wet. Always keep a distance of at least 10 m between the machine and high-voltage power lines and/or any objects that are touching them. If have to work within this safe distance you should always contact the relevant power company to make sure the power is switched off before you start work. This machine has a long reach. Make sure that no people or animals come closer than 15 m when the machine is running. Always wear approved protective gloves. Visual check. Protective goggles or a visor must be worn. Filling with chain oil and adjusting oil flow 2 - English