Husqvarna MZ 5225 Owners Manual - Page 42
Replacing the Fuel Filter, Tire Pressures, filter with the FLOW arrow pointing up toward - air filter
View all Husqvarna MZ 5225 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
MAINTENANCE Replacing the Fuel Filter Replace the line-mounted fuel filter every 100 hours (once per season) or more regularly if it is clogged. Replace the filter as follows: 1. Move the hose clamps away from the filter. Use flat-nosed pliers. 2. Pull the filter loose from the hose ends. 3. Push the new filter into the hose ends. Position the filter with the "FLOW" arrow pointing up toward the fuel pump. If necessary, a soap solution can be applied to the filter ends to ease mounting. 4. Move the hose clamps back toward the filter. Fuel Pump Air Filter Regularly check that the fuel pump's air filter is free from dirt. Remove the screws and open the pump, no hoses need be removed. The filter can be cleaned with a brush if necessary. Replace the filter on the console. Fuel filter The fuel pump's air filter Tire Pressures Rear tires should have a pressure of 10 psi / 69 kPa /.7 bar. Front tires should be at 15 psi / 103 kPa / 1 bar. 8011-468 8009-147 English-42 Tire pressures 8011-564