Husqvarna MZ 5225 Owners Manual - Page 53
Engine Oil Levels, Never fill to above the FULL mark.
View all Husqvarna MZ 5225 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
LUBRICATION Engine Oil Levels Check the oil level in the engine when the machine is standing level and the engine is stopped. Remove the dipstick, wipe it clean, and then replace it. Rotate dipstick counterclockwise until the cap drops down to the bottom of the threads. Take the dipstick out again and read the oil level. Remove the dipstick The oil level should lie between the markings on the dipstick. If the level is approaching the "ADD" mark, fill the oil to the "FULL" mark on the dipstick. Never fill to above the "FULL" mark. The oil is filled through the hole for the dipstick. API class SG, SH, SJ or higher must be used. Synthetic oil SAE 5W-30 or 10W-30 is recommended at all temperatures. Mineral oil SAE 5W-30, 10W-30 can be used between -18 °C/0 °F and +5 °C/40 °F. At temperature above +5 °C/40 °F single grade SAE 30 must be used. The engine holds 1.6 qt (1.7 liters) of oil excluding the filter, including filter 1.7 qt (1.9 liters). The dipstick markings 8011-500 8009-159 English-53