IBM DTLA-307075 Hard Drive Specifications - Page 21
Drive Characteristics, 1 Default logical drive parameters
UPC - 087944551096
View all IBM DTLA-307075 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
4.0 Drive characteristics This chapter describes the characteristics of the drive. 4.1 Default logical drive parameters The default of the logical drive parameters in Identify Device data are as shown below. Model DTLA-305010 DTLA-305020 DTLA-305030 DTLA-305040 DTLA-307015 DTLA-307020 DTLA-307030 DTLA-307045 DTLA-307060 DTLA-307075 Capacity (GB) Word 1 (Cyl) 10.2 16,383 20.5 16,383 30.7 16,383 41.1 16,383 15.6 16,383 20.5 16,383 30.7 16,383 46.1 16,383 61.4 16,383 76.8 16,383 Word 3 (Head) 16/15 16/15 16/15 16/15 16/15 16/15 16/15 16/15 16/15 16/15 Word 6 Sect/Trk) 63 63 63 63 63 63 63 63 63 63 Word 60-61 Customer Usable (LBA) Data Bytes 20,074,320 10,278,051,840 40,188,960 20,576,747,520 60,036,480 30,738,677,760 80,418,240 41,174,136,880 30,003,120 15,361,597,440 40,188,960 20,576,747,520 60,036,480 30,738,677,760 90,069,840 46,115,758,080 120,103,200 61,492,838,400 150,136,560 76,869,918,720 Figure 1. Default logical drive parameters Note: 16 is the ship default value of Word 3 (Head) in Figure 1. This value can be changed by jumper. Refer to 7.3, "Jumper Settings," on page 0 for further information. Deskstar 40GV & 75GXP hard disk drive specifications 9