Icom D-STAR Instruction Manual - Page 5

n Front panel 2 PANEL DESCRIPTIONS qw e r t q POWER SWITCH [POWER] The power switch for ID-RP4000V. w POWER INDICATOR The LED indicator for the ID-RP4000V and lights when the power is turned ON. e HIGH/LOW POWER SELECT SWITCH [H/L] Selects the transmit output power High (approx. 25 W) and Low (approx. 2.5 W). r SERVICE CONNECTOR T [SERVICE T] (p. 30) Connects a PC via an USB cable (A-B type; purchase separately) to set the transmit frequency. t SERVICE CONNECTOR R [SERVICE R] (p. 30) Connects a PC via an USB cable (A-B type; purchase separately) to set the receive frequency. n Rear panel q w q R ECEIVE ANTENNA CONNECTOR [RX ANT] (p. 5) Connect a 440 MHz band antenna through a duplexer. w T RANSMIT ANTENNA CONNECTOR [TX ANT] (p. 5) Connect a 440 MHz band antenna through a duplexer. e COOLING FAN r POWER CONNECTOR [DC13.8V] (p. 5) Connects to ID-RP2C via the supplied DC power cable (OPC-1309) to be supplied the DC power. e r ty t [CONT I/O] (p. 5) Connects to ID-RP2C via the supplied control cable for received or transmitted serial data communication. y GROUND TERMINAL [GND] (p. 4) Connects to a ground to prevent electrical shocks, TVI, BCI and other problems.