Icom D-STAR Instruction Manual - Page 9
Driver Installations - new
View all Icom D-STAR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
4 DRIVER INSTALLATIONS The USB (Universal Serial Bus) cable (A-B type; purchase separately) is used for the connection between IDRP4000V and a PC. So, the USB driver installation is required for the PC. In addition, individual USB driver installation is required for each connector, because the communication port number difference. In this instruction, describes with the installation of the ID-RP4000V [SERVICE T] connector for example. NOTE: The repeater unit connection may not be recognized with the PC according to the using USB cable length. Use the shorter USB cable as possible is recommended. n Microsoft® Windows® XP (Service Pack 2) q Start up the Windows. • Quit all applications if activated. w Insert the CD that comes with the ID-RP4000V, into the CD drive. e C onnect the PC and ID-RP4000V [SERVICE T] connector using with an USB cable (A-B type; purchase separately). r "Found New Hardware ID-RP4000V SERVICE T" appears as at left. t T he "Found New Hardware Wizard" will come up as at left. Select "No, not this time" then click [Next>]. Select Click + Continue to the next page.