Icom IC-A110 Instruction Manual - Page 10
hook scan, Dualwatch
View all Icom IC-A110 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
3 SCAN OPERATION I On-hook scan On-hook scan (Hanger scan) is available when taking the microphone from its hanger (off-hook) and /or returning it into the hanger (on-hook). q Push [SCAN] to start scanning. w When receiving a signal, scan pauses until the signal dis- appears. ➥ • You can converse by taking the microphone from the hook. e Place the microphone on the hook to restart scanning. r Scan restarts 2 sec. after the signal disappears even if you did not converse the station. When you take the microphone during the scan operation. ➥ • In VFO scan; scan resumes promptly to frequency. ➥ • In memory scan; scan resumes promptly to memory channel. ➥ • In priority memory scan; scan resumes to priority channel, NOTE: Be sure to connect the supplied microphone hanger to the vehicle's ground for on/off hook microphone functions. (p. 12) I Dualwatch Dualwatch monitors priority channel while you are receiving an other channel (VFO or memory channel). • If a signal is received on priority channel, dualwatch pauses on priority channel until the signal disappears. • To transmit on the selected channel during dualwatch, push and hold PTT. 250 msec. Priority channel 5 sec. VFO frequency or memory channel ï Operation qSelect the desired operating channel (VFO or Memory channel). w Push and hold [PRI] for 1 sec. to start dualwatch. 'P' blinks during dualwatch. e To cancel dualwatch, push [PRI] again. 7