Icom IC-A110 Instruction Manual - Page 7
Basic Operation - microphone
View all Icom IC-A110 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
2 BASIC OPERATION I Power ON q Push [POWER] to turn power ON. w Operate the transceiver as indicated in the following sec- tions. e Select the desired memory channel (or VFO frequency) with the [V/M] keys. • When receiving a signal, appears and audio is emit- ted from the speaker. • Further adjustment of audio level may be necessary at this point. • Push [SQL] to adjust the squelch level. (p. 6) • Push and hold the tuning dial for 1 sec. to select the [TS], each push increments/decrements to the frequency are either 10 kHz or 1 MHz. (p. 7) r Push and hold [PTT] to transmit, then speak into the mi- crophone. • Transmit indicator lights. t Release [PTT] to receive. I Channel selection ï VFO/Memory selection q Push [V/M] to select memory mode or VFO mode. ➥ Rotate the dial to select a desired frequency/channel. w During memory mode operation, push [V/M] key to transfer the memory contents to VFO. • Push [V/M] to select VFO mode. NOTE: Only frequency data is transferred even if the memory channel has a memory name. ï External speaker output control External speaker output can be turned OFF, if desired. q Push and hold [SQL] for 1 sec. w Rotate the dial to select "SP OFF". e Push [SQL] to turn to the previous mode. NOTE: This function available external speaker only. 4