Icom IC-M400BB Instruction Manual - Page 19
Specifications And Options
View all Icom IC-M400BB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
5 SPECIFICATIONS AND OPTIONS ■■Specifications DDGeneral • Frequency coverage European versions USA versions • Mode • Channel spacing • Operating temp. range • Current drain (at 13.8 V) • Power supply requirement • Frequency stability • Antenna impedance • Dimensions (approximately) (Projections not included) • Weight (approximately) : Tx 156.000-161.450 MHz Rx 156.000-163.425 MHz : Tx 156.025-157.425 MHz Rx 156.050-163.275 MHz : FM (16K0G3E), DSC (16K0G2B) : 25 kHz : -20°C to +60°C ; -4°F to +140°F : T X high 5.5 A maximum Max. audio 3.5 A maximum : 13.8 V DC nominal (negative ground) : ±1.5 kHz (-20°C to +60°C) : 50 ˘ nominal : 216(W) × 79(H) × 125(D) mm ; 8.5(W) × 3.1(H)× 4.9(D) inches : 830 g ; 29 oz DDTransmitter • O utput power • Modulation system • Max. frequency deviation : 25 W/1 W : V ariable reactance frequency modulation : ±5.0 kHz 1 2 • Spurious emissions European versions : Less than 0.25 µW 3 USA versions DDReceiver • Receive system : Less than -70 dBc (High) 4 Less than -56 dBc (Low) 5 : Double conversion 6 superheterodyne 7 • Sensitivity European versions 8 (20 dB SINAD) : -5 dBµ emf (typical) 9 USA versions (12 dB SINAD) : -13 dBµ (typical) 10 • Squelch sensitivity 11 European versions : Less than -2 dBµ emf USA versions : Less than -10 dBµ 12 • Intermodulation rejection ratio 13 European versions : More than 68 dB USA versions : More than 70 dB 14 • Spurious response rejection ratio : More than 70 dB • Adjacent channel selectivity : More than 70 dB 15 • Audio output power : More than 10 W at 10% distortion 16 with a 4 ˘ load (RX SP) : More than 2 W at 10% distortion with a 4 ˘ load (HM-195) All stated specifications are subject to change without notice or obligation. 11