Icom ID-51A PLUS Cloning Software Instructions - Page 1

INSTRUCTIONS CLONING SOFTWARE CS-51PLUS D T his cloning software is designed for data entry, settings, and cloning of the ID-51A/E VHF/UHF TRANSCEIVER. D T he CS-51PLUS has a Help file to describe functions and operation. ■■System requirements To use this cloning software, the following items and computer systems are required: • Transceiver The ID-51A/E with a serial number seal that has "PLUS" on it. The illustration above shows the ID-51A version. • Operating System (OS) Microsoft® Windows Vista® (32/64bit) Microsoft® Windows® 7 (32/64bit) Microsoft® Windows® 8 (32/64bit)* Microsoft® Windows® 8.1 (32/64bit)* *Except for Microsoft® Windows® RT. NOTE: These instructions are based on using Microsoft® Windows® 7. • Others Data cable + a USB port OR microSD card + a memory card reader or memory card slot • Optional OPC-2218LU data cable OR Optional OPC-2350LU data cable • A USB 1.1 or 2.0 port • microSD card (purchase separately) • Memory card reader or Memory card slot to read the microSD card (purchase separately) ■■Usable microSD card The microSD and microSDHC cards are not available from Icom. Purchase separately. Icom has checked operation with the following microSD and microSDHC cards. (As of August 2014) Brand Type microSD SanDisk® microSDHC Memory size 2 GB 4 GB 8 GB 16 GB 32 GB • Through the rest of this document, the microSD card and a microSDHC card are simply called microSD cards. • T he performance of the cards listed above is not guaranteed. ■■USB driver installation To use the OPC-2218LU data cable or the OPC2350LU data cable, you must install a USB driver. The latest USB driver and installation guide can be downloaded from the Icom website. Read the guide carefully, before installing the driver. NOTE: • DO NOT connect the transceiver to the PC with the OPC-2218LU until the USB driver installation has been completed. • T he driver is not supported by the Windows® automatic recognition system. - 1 - A-7178-1EX © 2014 Icom Inc.