Icom ID-51A PLUS Cloning Software Instructions - Page 3

Cloning from a PC using a microSD card To clone from a PC using a microSD card, follow the steps described below. Step 1 Insert a microSD card into your PC's card reader or card slot Step 2 Step 3 Make the initial set up Cloning (page 4) ■■microSD card and a PC connection NOTE: If you use a brand new microSD card, first format the card. See section 2 of the ID-51A/E Basic Instructions for details. qqSave the transceiver's settings data in the "icf" file format onto the microSD card. Open the "Save Setting" on the transceiver's MENU screen to save. (MENU > SD Card > Save Setting) wwTurn OFF the power, and remove the microSD card from the transceiver. eeInsert the card into the microSD card slot of the PC or the microSD card reader, as illustrated below. rrCopy the transceiver's setting data (ICF file), stored in the [Setting] folder of the card to a PC local folder. PC DD About the microSD card's folder composition The folder composition on the microSD card is shown to the right. The transceiver's setting data (ICF file) is stored in the [Setting] folder. Csv Gps QsoLog Reply RxLog ID-51 Setting PC Voice microSD card Transceiver to the Card reader OR to the Card slot VoiceRec VoiceTx ■■Initial setup window Before using this software, read the instructions thoroughly, and follow the steps below to make the initial setup in order to send the transceiver version information. NOTE: When the transceiver version information is not correctly sent to the software, some items may not appear on the software sheets. qqClick the [microSD] radio button. wwClick [Open...] to show the data file selection win- dow. Select the ICF file, saved in "microSD card and a PC connection," as described above. eeClick [OK] to read the selected file, and open the cloning window. Click Click - 3 - A-7178-1EX © 2014 Icom Inc.