Icom M510 Instruction Manual - Page 105
Power Link function, NMEA over WLAN settings, Function, Destination IP
View all Icom M510 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 105 highlights
WLAN SeTTING 11 7. "Connection successful." is displayed when the transceiver and the access point are connected. 8. Connect the access point and the CT-M500. LL See steps 8 ~ 13 on page 90. 1 2 3 4 NOTE: The default gateway settings 5 ••When the DHCP server function of the access point is set to "Enable," enter the default gateway IP address. 6 ••When you set your mobile device's IP address as the static IP address, set a default gateway IP address of the mobile device. 7 8 ■■ Power Link function 9 You can set whether the CT-M500 is automatically turned ON or OFF when the IC-M510 is turned ON or OFF. 10 zz Open the "Power Link" screen. [MENU] > Settings > WLAN > Advanced Settings > 11 CT-M500 > Power Link 12 ON: The CT-M500 is linked so that when you turn ON the IC-M510, the CT-M500 also turns ON 13 automatically. OFF: The CT-M500 is not linked to the IC-M510. 14 15 ■■ NMEA over WLAN settings 16 You can output the NMEA 0183 (ver. 2.0 or later) sentence through the Wireless LAN (WLAN). 17 [MENU] > Settings > WLAN > Advanced Settings > 18 NMEA over WLAN Function Select whether or not to connect to the NMEA 0183 network. Destination IP Enter the destination IP address in the NMEA network. Destination Port Enter the destination port number in the NMEA network. 92