Image Fitness 15.5s Treadmill English Manual - Page 17

THE INFORMATION MODE The console features an information mode that keeps track of treadmill usage information. The information mode also allows you to select a unit of measurement for the console and to turn on or turn off the display demo mode. To select the information mode, insert the key into the console while holding down the Stop button, and then release the Stop button. When the information mode is selected, the following information will be shown: An "E" for English miles or an "M" for metric kilometers will appear in the lower right corner of the display. Press the Speed increase button to change the unit of measurement, if desired. The console features a display demo mode, designed to be used if the treadmill is displayed in a store. While the demo mode is turned on, the console will function normally when you plug in the power cord, switch the reset/off circuit breaker to the reset position, and insert the key into the console. However, when you remove the key, the displays will remain lit, although the buttons will not function. If the demo mode is turned on, a "d" will appear in the display while the information mode is selected. To turn on or turn off the demo mode, press the Speed decrease button. The upper left corner of the display will show the total number of thousands of steps taken by all users of the treadmill. For example, the number 396 would indicate 396,000 steps taken. The lower left corner of the display will show the total number of hours that the treadmill has been used and the total number of miles (or kilometers) that the walking belt has moved, for a few seconds at a time. To exit the information mode, remove the key from the console. 17