Image Fitness 4.5 Bench English Manual - Page 12
Attach the Leg Lever 17 to the Adjustable Bench
View all Image Fitness 4.5 Bench manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
20. Turn the Seat (14) as shown. Attach the wide end of the Seat to the bracket on the Seat Mounting Bracket (23) with two M6 x 16mm Screws (3). Tilt the Seat Mounting Bracket (23) upwards and attach the narrow end of the Seat (14) to the Seat Mounting Bracket with an M6 x 35mm Bolt (34) and an M6 Washer (30). 21. Attach the Adjustable Bench Leg (2) to the Bench Leg (1) with the Adjustment Knob (37). Insert a 45mm Square Inner Cap (40) into the top of the Adjustable Bench Leg (2). 20 14 Bracket 23 30 3 34 21 40 2 37 1 22. Insert three 45mm Square Inner Caps (40) into the ends of the Leg Lever (17). Insert a 25mm Round Inner Cap (39) into the weight tube on the Leg Lever. Press a 25mm Angled Outer Cap (38) onto the other end of the weight tube. Attach the Leg Lever (17) to the Adjustable Bench Leg (2) with an M10 x 70mm Bolt (21) and an M10 Nylon Locknut (11). Note: Do not over tighten the M10 Nylon Locknut; the Leg Lever must pivot easily. 22 40 Weight Tube 39 40 21 2 40 38 17 23. Insert 19mm Round Inner Caps (26) into the ends of the three Pad Tubes (16). 23 26 25 2 Insert two Pad Tubes (16) through the holes in the Leg Lever (17). Slide a Foam Pad (25) onto each side of the Pad Tubes. 25 16 Insert a Pad Tube (16) through the upper tube on the 26 Adjustable Bench Leg (2). Slide a Foam Pad (25) onto each side of the Pad Tube. 25 17 11 25 25 26 12