Insignia NS-15LCD User Manual (English) - Page 24

NS-15LCD 15-inch TV - combined.fm Page 23 Wednesday, March 29, 2006 5:16 PM NS-15LCD 15" LCD TV Setting up in Component mode To set up in Component mode: 1 Press MENU. The main menu opens. 2 Press CH / to select Window, then press VOL / to open the Window menu. The Window menu opens. Auto Config Off Phase 80 Clock 60 H. Position 90 V. Position Temp 80 Red 80 Green 80 Blue 60 3 Press CH / to select the setting, then press VOL / to adjust the setting. Note Auto Config is not available in Component mode. Setting up in VGA mode The native resolution of this TV is 1024 × 768, so your computer should be set to this resolution when you connect it to the TV. This TV only supports refresh frequencies of up to 60 Hz, so set your computer accordingly. If you set it higher, the screen may flicker. To set up in VGA mode: 1 MENU. The main menu opens. 2 Press CH / to select Window, then press VOL / to open the Window menu. The Window menu opens. 3 Press CH / to select the item you want to set, then press VOL / to adjust the setting. Note The Phase and Clock settings should be adjusted until you get a good picture. If you experience problems when adjusting the settings, set Auto Config to Off, then reset it to On. The TV resumes its original settings. www.insignia-products.com 23