Insignia NS-42E440A13 User Manual (English) - Page 17
Insignia 42 1080p LCD TV
View all Insignia NS-42E440A13 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Insignia 42" 1080p LCD TV Using DVI (same as HDMI but requires a sound connection) Note You must use the HDMI3/DVI jack to connect a DVD or Blu-ray player using DVI. If you use another HDMI jack, you will not hear sound from the TV speakers. To connect a DVD or Blu-ray player using DVI: 1 Make sure that your TV's power cord is unplugged and the DVD or Blu-ray player is turned off. 2 Connect an HDMI-DVI adapter (not provided) to one end of an HDMI cable (not provided), then connect the adapter to the DVI OUT jack on the DVD or Blu-ray player. 3 Connect the other end of the cable to the HDMI3/DVI jack on the side of your TV. Using component video (better) To connect a DVD or Blu-ray player using component video: 1 Make sure that your TV's power cord is unplugged and the DVD or Blu-ray player is turned off. 2 Connect a component video cable (not provided) to the COMPONENT IN Y, PB, and PR jacks on the back of your TV and to the COMPONENT OUT jacks on the component video device. HDMI cable with HDMI-DVI adapter 3.5mm audio cable DVD or Blu-ray player Side of TV 4 Connect a 3.5mm audio cable (not provided) to the PC IN PC/DVI AUDIO IN jack on the side of your TV and to the AUDIO OUT jacks on the DVD or Blu-ray player. 5 Plug your TV's power cord into a power outlet, then turn on your TV. 6 Turn on the DVD or Blu-ray player, then set it to the correct output mode. For more information, see the documentation that came with the player. 7 Press INPUT to open the Input source list. 8 Press S or T to select HDMI 3, then press ENTER. Note You can also press HDMI one or more times to select the DVD or Blu-ray player. Back of TV Component video cable Cables are often color-coded to match color-coded jacks. Audio cable DVD or Blu-ray player 3 Connect an audio cable (not provided) to the COMPONENT IN L/R audio jacks on the back of your TV and to the L/R AUDIO OUT jacks on the DVD or Blu-ray player. Notes • When you connect the audio using the COMPONENT IN L/R audio jacks, the audio output is analog. 4 Plug your TV's power cord into a power outlet, then turn on your TV. 5 Turn on the DVD or Blu-ray player, then set it to the correct output mode. For more information, see the documentation that came with the player. 6 Press INPUT to open the Input source list. 7 Press S or T to select Component, then press ENTER. Note You can also press VIDEO to select the DVD or Blu-ray player. www.insigniaproducts.com 13