Insignia NS-42E440A13 User Manual (English) - Page 50

Problem No output from one of the speakers. After images appear. Solution • Adjust the audio balance. See "Adjusting sound settings" on page 26. • Make sure that the audio cables are connected correctly and securely to your TV. • Do not display a still image, such as a logo, game, or computer image, for an extended period of time. This can cause a permanent after-image to be burned into the screen. This type of damage is not covered by your warranty. Remote control Problem Solution Remote control does not work. • Make sure that the power cord is correctly connected to your TV and a power outlet. • Make sure that there are no obstructions between the remote control and the remote control sensor on the front of the TV. • Point the remote control directly at the remote control sensor on your TV. For the location of the remote control sensor, see "Aiming the remote control" on page 19. • The supplied batteries are wrapped tightly in clear plastic. Make sure that you have removed this plastic from the batteries. • Make sure that the batteries are installed correctly. See "Installing remote control batteries" on page 19. • Replace dead batteries with new batteries. See "Installing remote control batteries" on page 19. Trouble programming your existing universal remote control. • See instructions and a table of common codes in "Programming a different universal remote control" on page 48. • Codes are subject to change. For up-to-date codes, go to www.insigniaproducts.com/remotecodes • Replace dead batteries with new batteries. See "Installing remote control batteries" on page 19. • Refer to the User Guide that accompanied your universal remote control and contact the manufacturer if problems persist. NS-42E440A13 Insignia 42" 1080p LCD TV 46 www.insigniaproducts.com