Insignia NS-LCD27FS User Manual (English) - Page 9

Insignia NS-LCD27FS 27" LCD TV Connecting speakers To connect speakers to your TV: 1 Unplug the TV power cord and all devices connected to your TV. 2 Place your TV, face down, on a soft surface so that you do not damage the screen. 3 Attach each speaker and fixed board (1) to the back of your TV with the supplied screws (2), then tighten the screws. Use the following illustration to connect an outside antenna. VHF/UHF antenna VHF/UHF antenna OR 300-ohm cable with adapter Antenna cable Combination antenna 75-ohm cable Separate antennas UHF antenna OUT IN Combiner VHF antenna 300-ohm twin-lead 75-ohm cable 4 Snap the covers (3) over the speakers. 5 Connect the speakers to the speaker jacks on the back of your TV. Make sure that you connect the black part of the speaker wire to the - jack and the red part of the speaker wire to the + jack on the back of your TV. Note The location of the speaker jacks on your TV may vary from the illustration. Connecting an outside antenna Antenna cables come in two types: 75 ohm and 300 ohm. 75 ohm cable 300-ohm cable If your antenna cable has a 75 ohm connector, connect the cable to the coaxial jack on the back of your TV. If your antenna cable has a 300 ohm connector, connect the cable to a 300-75 ohm adapter (not included), connect the adapter to a 75 ohm cable, then connect the other end of the 75 ohm connector to the coaxial jack on the back of your TV. Connecting cable TV Your TV has a 75 ohm jack for connecting cable TV. Some cable TV providers scramble the signals for "premium" (pay) channels. To view these channels you need a converter/descrambler box. If you do not have a converter/descrambler box, you can connect your cable TV directly to your TV. If you have a converter/descrambler box, you can connect your cable TV using an RF switch (not supplied). For more information about connecting a converter/descramble box, contact your cable TV provider. To connect cable TV without a converter/descrambler box: 1 Connect one end of a 75 ohm cable to the coaxial jack on the back of your TV. 2 Connect the other end of the cable to the cable TV wall outlet. www.insignia-products.com 9