Intel BOXD5400XS Product Guide - Page 30
Installation Precautions, Prevent Power Supply Overload, Observe Safety and Regulatory Requirements
View all Intel BOXD5400XS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
Intel Desktop Board D5400XS Product Guide Installation Precautions When you install or test the Intel Desktop Board, observe all warnings and cautions in the installation instructions. To avoid personal injury, be careful of: • Sharp pins on connectors • Sharp pins on printed circuit assemblies • Rough edges and sharp corners on the chassis • Hot components (such as processors, voltage regulators, and heat sinks) • Damage to wires that could cause a short circuit Make sure that the green standby power indicator (see Figure 4) is not lit before installing or removing any devices connected to the board. Observe all warnings and cautions that instruct you to refer computer servicing to qualified technical personnel. Prevent Power Supply Overload Do not overload the power supply output. To avoid overloading the power supply, make sure that the calculated total current loads of all the modules within the computer is less than the output current rating of each of the power supplies output circuits. Observe Safety and Regulatory Requirements Read and follow the instructions in this section and the instructions supplied with the chassis and associated modules. If you do not follow these instructions and the instructions provided by the chassis and module suppliers, you increase your safety risk and the possibility of noncompliance with regional laws and regulations. If the instructions for the chassis are inconsistent with these instructions or the instructions for associated modules, contact the supplier to find out how you can ensure that your computer meets safety and regulatory requirements. Related Links For information about the Desktop Board's regulatory compliance, go to Appendix B on page 77. 30