Intel BOXD5400XS Product Guide - Page 31
Installing the I/O Shield
View all Intel BOXD5400XS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
Installing and Replacing Desktop Board Components Installing the I/O Shield The Desktop Board comes with an I/O shield. When installed in the chassis, the shield blocks radio frequency transmissions, protects internal components from dust and foreign objects, and promotes correct airflow within the chassis. NOTE Desktop Board D5400XS requires a chassis that meets the SSI/EATX Chassis specification (see http://ssiforum.oaktree.com/pdfs/SSI%20EEB%20v3-61.pdf). For a list of recommended chassis and power supplies for this Desktop Board, refer to the Intel Desktop Board D5400XS page at http://support.intel.com/support/motherboards/desktop/. Install the I/O shield before installing the Desktop Board in the chassis. Place the shield inside the chassis as shown in Figure 7. Press the shield into place so that it fits tightly and securely. If the shield does not fit, obtain a properly sized shield from the chassis supplier. Figure 7. Installing the I/O Shield 31