Intel D915PSY Product Specification

Intel D915PSY Manual

Get Intel D915PSY PDF manuals and user guides View all Intel D915PSY manuals
Add to My Manuals
Save this manual to your list of manuals

Intel D915PSY manual content summary:

  • Intel D915PSY | Product Specification - Page 1
    Order Number: C68598-001 The Intel® Desktop Board D915PGN/D915PSY may contain design defects or errors known as errata that may cause the product to deviate from published specifications. Current characterized errata are documented in the Intel Desktop Board D915PGN/D915PSY Specification Update.
  • Intel D915PSY | Product Specification - Page 2
    Intel® Desktop Boards D915PGN and D915PGN with BIOS identifier EV91510A.86A. Changes to this specification will be published in the Intel Desktop Board D915PGN instructions marked "reserved" or "undefined." Intel or other Intel literature, may be obtained from: Intel Corporation P.O. Box 5937 Denver,
  • Intel D915PSY | Product Specification - Page 3
    environmental requirements, and the BIOS for these Intel® Desktop Boards: D915PGN and D915PSY. It describes the standard product the hardware used on the Desktop Boards D915PGN and D915PSY A map of the resources of the Desktop Boards The features supported by the BIOS Setup program A description
  • Intel D915PSY | Product Specification - Page 4
    Intel Desktop Board D915PGN/D915PSY Technical Product Specification WARNING Warnings indicate conditions N indicates component type, xn are the relative coordinates of its location on the Desktop Boards D915PGN and D915PSY, and X is the instance of the particular part at that general location. For
  • Intel D915PSY | Product Specification - Page 5
    Manufacturing Options 13 1.3.3 Board Layouts 14 1.3.4 Block Diagram 18 1.4 Online Support ...19 1.5 Processor ...19 1.6 System Memory ...20 1.6.1 Memory Configurations 22 1.7 Intel® 915P Chipset...26 1.7.1 USB ...26 1.7.2 IDE Support 26 1.7.3 Real-Time Clock, CMOS SRAM, and Battery 28 1.8 PCI
  • Intel D915PSY | Product Specification - Page 6
    Intel Desktop Board D915PGN/D915PSY Technical Product Specification 1.14.5 1.14.6 1.14.7 1.14.8 1.14.9 Enabling the Trusted Platform Module 49 Assuming Trusted Platform Module Ownership 49 Recovery Procedures 50 Clearing Trusted Platform Module Ownership 51 Software Support 52 2 Technical
  • Intel D915PSY | Product Specification - Page 7
    Support 94 3.6.2 Custom Splash Screen 94 3.7 Boot Options ...95 3.7.1 CD-ROM Boot 95 3.7.2 Network Boot 95 3.7.3 Booting Without Attached Devices 95 3.7.4 Changing the Default Boot Device During POST 95 3.8 Fast Booting Systems with Intel Connectors 64 18. D915PGN Board Component-side
  • Intel D915PSY | Product Specification - Page 8
    11 2. Feature Summary ...12 3. Manufacturing Options 13 4. D915PGN Board Components Shown in Figure 1 15 5. D915PSY Board Components Shown in Figure 2 17 6. Supported System Bus Frequency and Memory Speed Combinations 20 7. Supported Memory Configurations 21 8. LAN Connector LED States 33
  • Intel D915PSY | Product Specification - Page 9
    Contents 46. BIOS Setup Program Function Keys 92 47. Boot Device Menu Options 95 48. Supervisor and User Password Functions 97 49. BIOS Error Messages 99 50. Uncompressed INIT Code Checkpoints 101 51. Boot Block Recovery Code Checkpoints 101 52. Runtime Code Uncompressed in F000 Shadow RAM
  • Intel D915PSY | Product Specification - Page 10
    Intel Desktop Board D915PGN/D915PSY Technical Product Specification x
  • Intel D915PSY | Product Specification - Page 11
    ...11 1.3 Overview ...12 1.4 Online Support ...19 1.5 Processor ...19 1.6 System Memory ...20 1.7 Intel® 915P Chipset...26 1.8 PCI Express called PCI Conventional. 1.2 Board Differences This TPS describes these Intel Desktop Boards: D915PGN and D915PSY. The Desktop Boards are identical with the
  • Intel D915PSY | Product Specification - Page 12
    Interfaces LAN Support BIOS • D915PGN: ATX (12.00 inches by 9.60 inches [304.80 millimeters by 243.84 millimeters]) • D915PSY: microATX Form Factor (9.60 inches by 9.60 inches [243.84 millimeters by 243.84 millimeters]) Support for an Intel® Pentium® 4 processor in an LGA775 socket with an
  • Intel D915PSY | Product Specification - Page 13
    fan connector for use in larger chassis (D915PGN board only). IEEE-1394a Interface Intel® 82801FBW I/O Controller Hub (ICH6W) IEEE- panel connector, two front-panel connectors). I/O controller Hub that supports Intel® Wireless Connect Technology. SCSI Hard Drive Activity LED Connector Allows
  • Intel D915PSY | Product Specification - Page 14
    Intel Desktop Board D915PGN/D915PSY Technical Product Specification 1.3.3 Board Layouts Figure 1 shows the location of the major components on the Desktop Board D915PGN. A B D F G HI J K L CE M N O MM LL KK P JJ Q R S II T HH U FF DD BB GG EE CC AA Z Y X WV Figure 1. D915PGN
  • Intel D915PSY | Product Specification - Page 15
    Table 4. D915PGN Board Components Shown in Figure 1. Item/callout from Figure 1 Description A Rear chassis ) O LGA775 processor socket P Processor fan connector Q Intel 82915P MCH R DIMM Channel A sockets S Serial port B connector (optional) T DIMM Channel B sockets U SCSI LED (
  • Intel D915PSY | Product Specification - Page 16
    Intel Desktop Board D915PGN/D915PSY Technical Product Specification Figure 2 shows the location of the major components on the Desktop Board D915PSY. A C E FG H I J BD K L KK M JJ II HH N O P Q GG R S T EE
  • Intel D915PSY | Product Specification - Page 17
    N Hardware monitoring and fan control ASIC O Processor fan connector P Intel 82915P MCH Q DIMM Channel A sockets R Serial port B connector (optional) S DIMM Channel B sockets T SCSI LED connector (optional) U I/O controller V Power connector W Diskette drive connector X Parallel
  • Intel D915PSY | Product Specification - Page 18
    LPC Bus PCI Express x1 Slot 1 PCI Express x1 Slot 2 D915PGN only Parallel ATA IDE Connector Parallel ATA IDE Interface LGA775 Processor Socket System Bus (800/533 MHz) PCI Express x16 Interface PCI Express x16 Connector Intel 82915P Memory Controller Hub (MCH) Channel A DIMMs (2) Channel
  • Intel D915PSY | Product Specification - Page 19
    Pentium 4 processors in an LGA775 processor socket with an 800 or 533 MHz system bus. See the Intel web site listed below for the most up-to-date list of supported processors. For information about... Supported processors for the D915PGN board Supported processors for the D915PSY board Refer to
  • Intel D915PSY | Product Specification - Page 20
    Intel Desktop Board D915PGN/D915PSY Technical Product Specification 1.6 System Memory The boards have four DIMM sockets and support the following memory features: • 2.5 V (only) DDR SDRAM DIMMs with gold-plated contacts • Unbuffered, single-sided or double-sided DIMMs with the following restriction
  • Intel D915PSY | Product Specification - Page 21
    Product Description Table 7 lists the supported DIMM configurations. Table 7. Supported Memory Configurations DIMM Capacity SDRAM Configuration Density SDRAM Organization Front-side/Back-side Number of SDRAM Devices 128 MB SS 256 Mbit 16 M x 16/empty 4
  • Intel D915PSY | Product Specification - Page 22
    Desktop Board D915PGN/D915PSY Technical Product Specification 1.6.1 Memory Configurations The Intel 82915P MCH supports two types of the memory channel and DIMM configuration. ✏ NOTE The DIMM0 sockets of both channels are blue. The DIMM1 sockets of both channels are black. Channel A, DIMM 0 Channel
  • Intel D915PSY | Product Specification - Page 23
    DIMMs. In this example, the combined capacity of the two DIMMs in Channel A equal the capacity of the single DIMM in the DIMM0 (blue) socket of Channel B. 256 MB 256 MB 512 MB Channel A, DIMM 0 Channel A, DIMM 1 Channel B, DIMM 0 Channel B, DIMM 1 OM17122 Figure 6. Dual Channel (Interleaved) Mode
  • Intel D915PSY | Product Specification - Page 24
    Intel Desktop Board D915PGN/D915PSY Technical Product Specification Figure 7 shows a dual channel configuration using four DIMMs. In this example, the combined capacity of the two DIMMs in Channel A equal
  • Intel D915PSY | Product Specification - Page 25
    this example, the combined capacity of the two DIMMs in Channel A does not equal the capacity of the single DIMM in the DIMM0 (blue) socket of Channel B. 256 MB 512 MB 512 MB Channel A, DIMM 0 Channel A, DIMM 1 Channel B, DIMM 0 Channel B, DIMM 1 OM17126 Figure 9. Single Channel (Asymmetric) Mode
  • Intel D915PSY | Product Specification - Page 26
    Intel 915P chipset Resources used by the chipset Refer to http://developer.intel.com/ Chapter 2 1.7.1 USB The boards support up to eight USB 2.0 ports, supports panel The location of the front panel USB connectors on the D915PGN board The location of the front panel USB connectors on the D915PSY
  • Intel D915PSY | Product Specification - Page 27
    the transfer rate and translation mode to the BIOS. The boards support Laser Servo (LS-120) diskette technology through the Parallel ATA IDE For information about The location of the Parallel ATA IDE connector on the D915PGN board The location of the Parallel ATA IDE connector on the D915PSY board
  • Intel D915PSY | Product Specification - Page 28
    Intel Desktop Board D915PGN/D915PSY Technical Product Specification For information about The location of the Serial ATA IDE connectors on the D915PGN not plugged into a wall socket, the battery has an Support for Active State Power Management (ASPM) • SMBus 2.0 support • Wake# signal supporting
  • Intel D915PSY | Product Specification - Page 29
    data transfers at speeds up to 115.2 kbits/sec with BIOS support. For information about The location of the serial port A connector The location of the serial port B connector on the D915PGN board The location of the serial port B connector on the D915PSY board The signal names of the serial
  • Intel D915PSY | Product Specification - Page 30
    Intel Desktop Board D915PGN/D915PSY Technical Product Specification 1.9.4 Keyboard and Mouse Interface PS/2 keyboard and mouse connectors are located on the back panel. ✏ NOTE The keyboard is supported in the bottom PS/2 connector and the mouse is supported in the top PS/2 connector. Power to the
  • Intel D915PSY | Product Specification - Page 31
    and the optional S/PDIF connector on the D915PGN board The location of the front panel audio Intel® High Definition Audio Subsystem The Intel High Definition Audio subsystem includes the following: • Intel 82801FB I/O Controller Hub (ICH6) • Realtek ALC860 audio codec • Microphone input that supports
  • Intel D915PSY | Product Specification - Page 32
    Intel Desktop Board D915PGN/D915PSY Technical Product Specification Figure 11 is a block diagram of the High Definition audio subsystem. 82801FB I/O Controller Hub (ICH6) Intel Supports ACPI technology  Supports LAN wake capabilities 1.11.1 Intel® 82562EZ Physical Layer Interface Device The Intel
  • Intel D915PSY | Product Specification - Page 33
    activity is occurring. 10 Mbits/sec data rate is selected. 100 Mbits/sec data rate is selected. 1.11.2 Alert Standard Format (ASF) Support The boards provide the following ASF support for PCI Express x1 bus add-in LAN cards and PCI Conventional bus add-in LAN cards installed in PCI Conventional bus
  • Intel D915PSY | Product Specification - Page 34
    wireless Access Point services to a home or small office network through a wireless configuration wizard. Intel Wireless Connect Technology features location of the fan connectors and sensors for thermal monitoring on the D915PGN board The location of the fan connectors and sensors for thermal monitoring
  • Intel D915PSY | Product Specification - Page 35
    the D915PSY board Product Description 35
  • Intel D915PSY | Product Specification - Page 36
    Intel Desktop Board D915PGN/D915PSY Technical Product Specification 1.12.2 Thermal Monitoring Figure 13 shows the location of the sensors and fan connectors for the D915PGN board. 13 3 1 A CB 4 1 D 13 1 3 Item A B C D E F G H HG F E OM17055 Description Thermal diode, located on
  • Intel D915PSY | Product Specification - Page 37
    chassis fan Front chassis fan Figure 14. Thermal Monitoring for D915PSY Board 1.12.3 Fan Monitoring Fan monitoring can be implemented using Intel® Desktop Utilities, LANDesk* software, or thirdparty software. The level of monitoring and control is dependent on the hardware monitoring ASIC used
  • Intel D915PSY | Product Specification - Page 38
    Intel Desktop Board D915PGN/D915PSY Technical Product Specification 1.12.4 Chassis Intrusion and Detection The boards support a chassis Wake from PS/2 devices  Power Management Event signal (PME#) wake-up support 1.13.1 ACPI ACPI gives the operating system direct control over the power management
  • Intel D915PSY | Product Specification - Page 39
    Product Description Table 9 lists the system states based on how long the power switch is pressed, depending on how ACPI is configured with an ACPI-aware operating system. Table 9. Effects of Pressing the Power Switch If the system is in this state... Off (ACPI G2/G5 - Soft off) On (ACPI G0 -
  • Intel D915PSY | Product Specification - Page 40
    Intel Desktop Board D915PGN/D915PSY Technical Product Specification Table 10 lists the power states supported by the boards logic, except when provided by battery or external source. No power to the system. Service can be performed safely. Notes: 1. Total system power is dependent on the system
  • Intel D915PSY | Product Specification - Page 41
    Failure to do so can damage the power supply. The total amount of standby current required depends on the wake devices supported and manufacturing options. The boards provide several power management hardware features, including: • Power connector • Fan connectors • LAN wake capabilities • Instantly
  • Intel D915PSY | Product Specification - Page 42
    Intel Desktop Board D915PGN/D915PSY Technical Product Specification Resume on Ring connector is wired to a fan tachometer input of the hardware monitoring and fan control ASIC • All fan connectors support closed-loop fan control that can adjust the fan speed or switch the fan on or off as needed.
  • Intel D915PSY | Product Specification - Page 43
    specification can participate in power management and can be used to wake the computer. The use of Instantly Available PC technology requires operating system support and PCI 2.2 compliant add-in cards, PCI Express add-in cards, and drivers. 1.13.2.5 Resume on Ring The operation of Resume on Ring
  • Intel D915PSY | Product Specification - Page 44
    Intel Desktop Board D915PGN/D915PSY Technical Product Specification 1.13.2.6 Wake from USB USB bus activity wakes the computer from ACPI S1 or S3 states. ✏ NOTE Wake from USB requires the use of a USB peripheral that supports Wake from USB. 1.13.2.7 Wake from PS/2 Devices PS/2 device activity wakes
  • Intel D915PSY | Product Specification - Page 45
    Product Description CR3J1 OM17056 Figure 15. Location of the Standby Power Indicator LED 45
  • Intel D915PSY | Product Specification - Page 46
    1.14.1 System Requirements • Intel Desktop Board D915PGN or D915PSY • Microsoft Windows follow the instructions below may cause you to lose data. Read and follow these instructions prior to a platform failure and/or replacement of the motherboard, recovery procedures may allow migratable keys to be
  • Intel D915PSY | Product Specification - Page 47
    NOT RECOVERABLE and cannot be reset without the original text. The system owner should document all passwords, store them in a secured location (vault, safe deposit box, off-site storage, etc.), and have them available for future use. These documents should be updated after any password changes. 47
  • Intel D915PSY | Product Specification - Page 48
    Intel Desktop Board D915PGN/D915PSY Technical Product Specification 1.14.3.2 Emergency Recovery File Back Up Procedures The Emergency Recovery Token (SPEmRecToken.xml) must be saved or moved to a removable media (
  • Intel D915PSY | Product Specification - Page 49
    Product Description 1.14.5 Enabling the Trusted Platform Module The Trusted Platform Module is disabled by default when shipped to insure that the owner/end customer of the system initializes the TPM and configures all security passwords. The owner/end customer should use the following steps to
  • Intel D915PSY | Product Specification - Page 50
    Intel Desktop Board D915PGN/D915PSY Technical Product Specification 15. Follow the instructions key is generated, then keys will have to be manually backed up using the Key Transfer Manager when the stored in a secured location (vault, safe deposit box, offsite storage, etc.) in case they are needed
  • Intel D915PSY | Product Specification - Page 51
    Recovery procedures may allow the migratable keys to be recovered and might restore access to encrypted data. (Review the Recovery Procedures for detailed instructions). The TPM may be cleared to transfer ownership of the platform to a new owner. 1. Observe precautions in the above WARNING then open
  • Intel D915PSY | Product Specification - Page 52
    Intel Desktop Board D915PGN/D915PSY Technical Product Specification 1.14.9 Software Support • For assistance with the Infineon Security Platform Software, visit the web at: http://www.infineon.com • For assistance with the Wave System EMBASSY Trust Suite,
  • Intel D915PSY | Product Specification - Page 53
    Product Description 53
  • Intel D915PSY | Product Specification - Page 54
  • Intel D915PSY | Product Specification - Page 55
    2 Technical Reference What This Chapter Contains 2.1 Introduction ...55 2.2 Memory Resources ...55 2.3 DMA Channels ...57 2.4 Fixed I/O Map...58 2.5 PCI Configuration Space Map 59 2.6 Interrupts ...60 2.7 PCI Conventional Interrupt Routing Map 61 2.8 Connectors...63 2.9 Jumper Block ...77 2.10
  • Intel D915PSY | Product Specification - Page 56
    Intel Desktop Board D915PGN/D915PSY Technical Product Specification The amount of installed memory that can be used will vary based on add-in cards and BIOS settings. Figure 16
  • Intel D915PSY | Product Specification - Page 57
    Technical Reference 2.2.2 Memory Map Table 12 lists the system memory map. Table 12. System Memory Map Address Range (decimal) 1024 K - 4194304 K 960 K - 1024 K 896 K - 960 K 800 K - 896 K Address Range (hex) 100000 - FFFFFFFF F0000 - FFFFF E0000 - EFFFF C8000 - DFFFF 640 K - 800 K 639 K - 640
  • Intel D915PSY | Product Specification - Page 58
    Intel Desktop Board D915PGN/D915PSY Technical Product Specification 2.4 Fixed I/O Map Table 14. I/O Map Address (hex) Size Description 0000 - 00FF 0170 - 0177 256 bytes 8 bytes Used by the Desktop Board D915PGN/D915PSY. Refer to the ICH6 data sheet for dynamic addressing information.
  • Intel D915PSY | Product Specification - Page 59
    bus connector 2 (Note 3) 02 00 PCI Conventional bus connector 3 (Note 2) (Note 3) 03 00 PCI Conventional bus connector 4 (Note 2) (Note 3) 08 00 Intel 82562EZ 10/100 Mbits/sec LAN PLC (if present) Notes: 1. Present only when a PCI Express x16 graphics card is installed. 2. Not present
  • Intel D915PSY | Product Specification - Page 60
    Intel Desktop Board D915PGN/D915PSY Technical Product Specification 2.6 Interrupts The interrupts can be routed through either the Programmable Interrupt Controller (PIC) or the Advanced Programmable Interrupt Controller (APIC) portion of the ICH6 component. The PIC is supported in Windows 98 SE
  • Intel D915PSY | Product Specification - Page 61
    Technical Reference 2.7 PCI Conventional Interrupt Routing Map This section describes interrupt sharing and how the interrupt signals are connected between the PCI Conventional bus connectors and onboard PCI Conventional devices. The PCI Conventional specification describes how interrupts can be
  • Intel D915PSY | Product Specification - Page 62
    Intel Desktop Board D915PGN/D915PSY Technical Product Specification Table 17. PCI Interrupt Routing Map PCI Interrupt Source IEEE-1394a controller PCI bus connector 1 PCI bus connector 2 PCI bus connector 3 (
  • Intel D915PSY | Product Specification - Page 63
    Technical Reference 2.8 Connectors CAUTION Only the following connectors have overcurrent protection: back panel USB, front panel USB, and PS/2. The other internal connectors are not overcurrent protected and should connect only to devices inside the computer's chassis, such as fans and internal
  • Intel D915PSY | Product Specification - Page 64
    Intel Desktop Board D915PGN/D915PSY Technical Product Specification 2.8.1 Back Panel Connectors Figure 17 shows the location of the back panel connectors. The back panel connectors are color-coded. The
  • Intel D915PSY | Product Specification - Page 65
    Table 18. Back Panel Connectors Shown in Figure 17. Item/callout from Figure 17 Description A PS/2 mouse port (Green) B PS/2 keyboard port (Purple) C Parallel port (Burgundy) D Serial port A (Teal) E Audio line in/Retasking Port C (Light blue) F Audio line out/Retasking Port D (Lime
  • Intel D915PSY | Product Specification - Page 66
    Intel Desktop Board D915PGN/D915PSY Technical Product Specification 2.8.2 Component-side Connectors Figure 18 shows the locations of the component-side connectors on the D915PGN board. B D FH J L AC E GI K M N P O 13 12 9 10 3 4 1 1 2 1 10 12 10 1 3 1 4 4 13 12 10 11 1 3 9 1 11
  • Intel D915PSY | Product Specification - Page 67
    Table 19 lists the component-side connectors identified in Figure 18. Table 19. Component-side Connectors Shown in Figure 18. Item/callout from Figure 18 Description A PCI Conventional bus add-in card connector 4 B Rear fan connector 2 C PCI Conventional bus add-in card connector 3 D PCI
  • Intel D915PSY | Product Specification - Page 68
    Intel Desktop Board D915PGN/D915PSY Technical Product Specification Figure 19 shows the locations of the component-side connectors on the D915PSY board. BD AC E F G I H BB AA 12 9 10 3 4 1 1 1 3 1 44
  • Intel D915PSY | Product Specification - Page 69
    Table 20 lists the component-side connectors identified in Figure 19. Table 20. Component-side Connectors Shown in Figure 19. Item/callout from Figure 19 Description A S/PDIF connector (optional) B Front panel audio connector C PCI Conventional bus add-in card connector 2 D Front panel
  • Intel D915PSY | Product Specification - Page 70
    Intel Desktop Board D915PGN/D915PSY Technical Product Specification Table 21. S/PDIF Connector (Optional) Pin Signal Name 1 +5 V 2 S/PDIF Output 3 Ground Table 22. ATAPI CD-ROM Connector (Optional) Pin Signal Name 1
  • Intel D915PSY | Product Specification - Page 71
    5 RXN 6 RXP 7 Ground Table 28. Processor Fan Connector Pin Signal Name 1 Ground 2 +12 V 3 FAN_TACH 4 FAN_CONTROL 2.8.2.1 Chassis Fan Connectors The D915PGN board has three standard and one optional chassis fan connectors: • Front chassis fan • Rear chassis fan 1 • Rear chassis fan
  • Intel D915PSY | Product Specification - Page 72
    Desktop Board D915PGN/D915PSY Technical Product Specification 2.8.2.2 Power Supply Connectors The board has three power supply connectors: • Main power - a 2 x 12 connector. This connector is compatible with 2 x 10 connectors previously used on Intel Desktop boards. The board supports the use of
  • Intel D915PSY | Product Specification - Page 73
    Add-in Card Connectors The board has the following add-in card connectors: • PCI Express x16: one connector supporting simultaneous transfer speeds up to 8 GBytes/sec. • PCI Express x1: the D915PGN board has two PCI Express x1 connectors; the D915PSY board has one PCI Express x1 connector. The x1
  • Intel D915PSY | Product Specification - Page 74
    Intel Desktop Board D915PGN/D915PSY Technical Product Specification 2.8.2.5 Front Panel Connector This section describes the functions of the front panel connector. Table 34 lists the signal names of the
  • Intel D915PSY | Product Specification - Page 75
    Technical Reference 2.8.2.5.2 Reset Switch Connector [Purple] Pins 5 and 7 [Purple] can be connected to a momentary single pole, single throw (SPST) type switch that is normally open. When the switch is closed, the board resets and runs the POST. 2.8.2.5.3 Power/Sleep LED Connector [Green] Pins 2
  • Intel D915PSY | Product Specification - Page 76
    Intel Desktop Board D915PGN/D915PSY Technical Product Specification Power (+5 V DC) One D− USB Port D+ Ground Key (no pin) 1 2 3 4 5 6 7 8 10 Power (+5 V DC) D− One USB D+ Port Ground No Connect OM15963 Figure 21.
  • Intel D915PSY | Product Specification - Page 77
    from the computer before changing a jumper setting. Otherwise, the board could be damaged. Figure 23 shows the location of the jumper block on the D915PGN board. (The jumper is in the same location on the D915PSY board.) The jumper block determines the BIOS Setup program's mode. Table 37 describes
  • Intel D915PSY | Product Specification - Page 78
    Intel Desktop Board D915PGN/D915PSY Technical Product Specification 2.10 Mechanical Considerations 2.10.1 D915PGN Board Form Factor The D915PGN board is designed to fit into an ATX-form-factor chassis. Figure 24 illustrates the mechanical form factor of the board. Dimensions are given in
  • Intel D915PSY | Product Specification - Page 79
    Technical Reference 2.10.2 D915PSY Board Form Factor The D915PSY board is designed to fit into either a microATX or an ATX-form-factor chassis. Figure 25 illustrates the mechanical form factor of the board. Dimensions are given in inches [millimeters]. The outer dimensions are 9.60 inches by 9.60
  • Intel D915PSY | Product Specification - Page 80
    Intel Desktop Board D915PGN/D915PSY Technical Product Specification 2.10.3 I/O drawing in this document is for reference only. An I/O shield compliant with the ATX chassis specification 2.03 is available from Intel. 1.55 REF [0.061] 162.3 REF [6.390] 20. ± 0.254 TYP [0.787 ± 0.10] 159.2 ± 0.
  • Intel D915PSY | Product Specification - Page 81
    designed to provide 2 A (average) of +5 V current for each add-in board. The total +5 V current draw for both boards is as follows: • A fully loaded D915PGN board (all six expansion slots and the PCI Express x16 slot filled) must not exceed 14 A. • A fully loaded D915PSY board (all three expansion
  • Intel D915PSY | Product Specification - Page 82
    Intel Desktop Board D915PGN/D915PSY Technical Product Specification 2.11.3 Fan Connector Current the power supply. The total amount of standby current required depends on the wake devices supported and manufacturing options. System integrators should refer to the power usage values listed in Table
  • Intel D915PSY | Product Specification - Page 83
    responsibility for determining the adequacy of any thermal or system design remains solely with the reader. Intel makes no warranties or representations that merely following the instructions presented in this document will result in a system with adequate thermal performance. CAUTION Ensure that
  • Intel D915PSY | Product Specification - Page 84
    Intel Desktop Board D915PGN/D915PSY Technical Product Specification CAUTION Ensure that proper airflow is temperature zones. A B D C Item A B C D Description Processor voltage regulator area Processor Intel 82915P MCH Intel 82801FB ICH6 Figure 28. Localized High Temperature Zones OM17063 84
  • Intel D915PSY | Product Specification - Page 85
    specification updates 99 oC (under bias) 110 oC (under bias) For information about Intel Pentium 4 processor datasheets and specification updates Refer to Section 1.4, page 19 2.13 calculated from predicted data at 55 ºC. The MTBF for the D915PGN and D915PSY boards is 102,038 hours. 85
  • Intel D915PSY | Product Specification - Page 86
    Intel Desktop Board D915PGN/D915PSY Technical Product Specification 2.14 Environmental Table 41 lists the environmental specifications for the board. Table 41. Environmental Specifications Parameter Temperature Non-Operating Operating Shock
  • Intel D915PSY | Product Specification - Page 87
    Technology Equipment - Safety - Part 1: General Requirements (International) 2.15.2 EMC Regulations Table 43 lists the EMC regulations the Desktop Boards D915PGN and D915PSY comply with when correctly installed in a compatible host system. Table 43. EMC Regulations Regulation FCC (Class B) ICES
  • Intel D915PSY | Product Specification - Page 88
    energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is of Conformity Statement We, Intel Corporation, declare under our sole responsibility that the product: Intel® Desktop Boards D915PGN and D915PSY are in
  • Intel D915PSY | Product Specification - Page 89
    following materials that may be regulated upon disposal: lead solder on the printed wiring board assembly. 2.15.4.2 Recycling Considerations Intel encourages its customers to recycle its products and their components (e.g., batteries, circuit boards, plastic enclosures, etc.) whenever possible. In
  • Intel D915PSY | Product Specification - Page 90
    Desktop Boards: E210882 (component side). FCC Declaration of Conformity logo mark for Class B equipment; includes Intel name and D915PGN or D915PSY model designation (component side). Marking CE mark. Declares compliance to European Union (EU) EMC directive (89/336/EEC) and Low Voltage directive
  • Intel D915PSY | Product Specification - Page 91
    Flash Memory Organization 92 3.3 Resource Configuration 92 3.4 System Management BIOS (SMBIOS 93 3.5 Legacy USB Support...93 3.6 BIOS Updates ...94 3.7 Boot Options ...95 3.8 Fast Booting Systems with Intel® Rapid BIOS Boot 96 3.9 BIOS Security Features 97 3.1 Introduction The boards use an
  • Intel D915PSY | Product Specification - Page 92
    Intel Desktop Board D915PGN/D915PSY Technical Product Specification Table 45 lists the program, the BIOS automatically sets up the PCI IDE connector with independent I/O channel support. The IDE interface supports hard drives up to ATA-66/100 and recognizes any ATAPI compliant devices, including
  • Intel D915PSY | Product Specification - Page 93
    the capability of the drive. You can override the autoconfiguration options by specifying manual configuration in the BIOS Setup program. To use ATA-66/100 features The BIOS supports an SMBIOS table interface for such operating systems. Using this support, an SMBIOS service-level application
  • Intel D915PSY | Product Specification - Page 94
    Web. • Intel® Flash Memory Update Utility, which requires creation of a boot diskette and manual rebooting of instructions distributed with the upgrade utility before attempting a BIOS update. For information about The Intel World Wide Web site Refer to Section 1.4, page 19 3.6.1 Language Support
  • Intel D915PSY | Product Specification - Page 95
    boot device, the hard drive second, and the ATAPI CD-ROM third. The fourth device is disabled. 3.7.1 CD-ROM Boot Booting from CD-ROM is supported in compliance to the El Torito bootable CD-ROM format specification. Under the Boot menu in the BIOS Setup program, ATAPI CD-ROM is listed
  • Intel D915PSY | Product Specification - Page 96
    Intel Desktop Board D915PGN/D915PSY Technical Product Specification 3.8 Fast Booting Systems with Intel® Rapid BIOS Boot These factors affect system boot speed: • Selecting and configuring peripherals properly • Using an optimized BIOS, such as the Intel® Rapid BIOS 3.8.1 Peripheral Selection and
  • Intel D915PSY | Product Specification - Page 97
    Overview of BIOS Features 3.9 BIOS Security Features The BIOS includes security features that restrict access to the BIOS Setup program and who can boot the computer. A supervisor password and a user password can be set for the BIOS Setup program and for booting the computer, with the following
  • Intel D915PSY | Product Specification - Page 98
    Intel Desktop Board D915PGN/D915PSY Technical Product Specification 98
  • Intel D915PSY | Product Specification - Page 99
    4 Error Messages and Beep Codes What This Chapter Contains 4.1 BIOS Error Messages 99 4.2 Port 80h POST Codes 101 4.3 Bus Initialization Checkpoints 105 4.4 Speaker ...106 4.5 BIOS Beep Codes...106 4.1 BIOS Error Messages Table 49 lists the error messages and provides a brief description of
  • Intel D915PSY | Product Specification - Page 100
    Intel Desktop Board D915PGN/D915PSY Technical Product Specification Table 49. BIOS Error Messages (continued Memory size has increased since the last boot. If no memory was added there may be a problem with the system. Memory Size Changed Memory size has changed since the last boot. If no memory
  • Intel D915PSY | Product Specification - Page 101
    recovery code in F000 Shadow RAM. Initialize interrupt vector tables, initialize system timer, initialize DMA controller and interrupt controller. Initialize extra (Intel Recovery) Module. Initialize floppy drive. Try to boot from floppy. If reading of boot sector is successful, give control to boot
  • Intel D915PSY | Product Specification - Page 102
    Intel Desktop Board D915PGN/D915PSY Technical Product Specification Table 52. Runtime Code Uncompressed in F000 Shadow RAM Code 03 05 06 07 08 0B 0C 0E 0F 10 11
  • Intel D915PSY | Product Specification - Page 103
    Error Messages and Beep Codes Table 52. Runtime Code Uncompressed in F000 Shadow RAM (continued) Code 40 42 43 44 45 46 47 48 49 4B 4C 4D 4E 4F 50 51 52 53 54 57 58 59 60 62 65 66 7F 80 81 82 83 Description of POST Operation To prepare the descriptor tables. To enter in virtual mode for memory
  • Intel D915PSY | Product Specification - Page 104
    Intel Desktop Board D915PGN/D915PSY Technical Product Specification Table 52. Runtime Code Uncompressed in F000 Shadow RAM system configuration. Put INT13 module runtime image to shadow. Generate MP for multiprocessor support (if present). Put CGA INT10 module (if present) in Shadow. continued 104
  • Intel D915PSY | Product Specification - Page 105
    Error Messages and Beep Codes Table 52. Runtime Code Uncompressed in F000 Shadow RAM (continued) Code AE B1 00 Description of POST Operation Uncompress SMBIOS module and init SMBIOS code and form the runtime SMBIOS image in shadow. Going to copy any code to specific area. Copying of code to
  • Intel D915PSY | Product Specification - Page 106
    Intel Desktop Board D915PGN/D915PSY Technical Product Specification Table 55 describes the Beep Codes Whenever a recoverable error occurs during POST, the BIOS displays an error message describing the problem (see Table 56). The BIOS also issues a beep code (one long tone followed by two short
  • Intel D915PSY | Product Specification - Page 107
    Error Messages and Beep Codes 107
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
Intel
®
Desktop Boards
D915PGN/D915PSY
Technical Product Specification
June 2004
Order Number:
C68598-001
The Intel
®
Desktop Board D915PGN/D915PSY may contain design defects or errors known as errata that may cause the product to deviate from published specifications.
Current
characterized errata are documented in the Intel Desktop Board D915PGN/D915PSY Specification Update.