Intel D945GPM English Product Guide - Page 41
Connecting IEEE 1394a Headers, Connecting the Front Panel Header, Connecting Hi-Speed USB 2.0
View all Intel D945GPM manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
Installing and Replacing Desktop Board Components Connecting IEEE 1394a Headers Before connecting the IEEE 1394a headers, observe the precautions in "Before You Begin" on page 23. See Figure 20, B on page 39 for the location of the blue IEEE 1394a headers. Table 8 shows the pin assignments for the headers. Table 8. IEEE 1394a Header Signal Names Pin Signal Name Pin 1 TPA1+ 2 3 Ground 4 5 TPA2+ 6 7 +12 V 8 9 Key (no pin) 10 Signal Name TPA1Ground TPA2+12 V Ground Connecting the Front Panel Header Before connecting the front panel header, observe the precautions in "Before You Begin" on page 23. See Figure 20, E on page 39 for the location of the multi-colored front panel header. Table 9 shows the pin assignments for the front panel header. Table 9. Front Panel Header Signal Names Pin Signal In/Out Description Hard Drive Activity LED (Orange) Pin Signal In/Out Description Power LED (Green) 1 HD_PWR 3 HDA# Out Hard disk LED pull- 2 HDR_BLNK_GRN Out Front panel green up (330 Ω) to +5 V LED Out Hard disk active LED 4 HDR_BLNK_YEL Out Front panel yellow LED Reset Switch (Purple) On/Off Switch (Red) 5 Ground 7 FP_RESET# In Ground Reset switch 6 SWITCH_ON# In 8 Ground Power switch Ground 9 5+ V Reserved. Do not use. 10 No pin No pin Connecting Hi-Speed USB 2.0 Headers Before connecting the USB 2.0 headers, observe the precautions in "Before You Begin" on page 23. See Figure 20, F on page 39 for the location of the black USB 2.0 headers. Table 10 shows the pin assignments for the headers. Table 10. Hi-Speed USB 2.0 Header Signal Names USB Port A Pin Signal name Pin 1 Power 2 3 D- 4 5 D+ 6 7 Ground 8 9 Key 10 Note: USB ports may be assigned as needed. USB Port B Signal name Power DD+ Ground No connect 41