Intel D945GPM English Product Guide - Page 57

Configuring Intel, Matrix Storage, Technology RAID

Get Intel D945GPM PDF manuals and user guides View all Intel D945GPM manuals
Add to My Manuals
Save this manual to your list of manuals

Page 57 highlights

4 Configuring Intel® Matrix Storage Technology (RAID) Requires Serial ATA (SATA) Hard Drives Configuring the BIOS for Intel Matrix Storage Technology 1. Assemble your system and attach one or more SATA hard drives. 2. Enter system BIOS Setup by pressing the key after the Power-On-Self-Test (POST) memory tests begin. 3. Go to Advanced Drive Configuration Configure SATA as; ensure RAID is selected. 4. Then save your settings by pressing . Creating Your RAID Set (for systems with more than one SATA hard drive) 1. Upon re-boot, you will see the following Intel Matrix Storage Manager option ROM status message on the screen: Press to enter the RAID Configuration Utility. Press and enter the RAID Configuration Utility. 2. In the Intel Matrix Storage Manager option ROM Main Menu, select option #1: Create RAID Volume. Enter a volume name and press . NOTE: The RAID Volume name must be in English alphanumeric ASCII characters. 3. Use the arrow keys to select RAID 0 or RAID 1 (if only two SATA drives are available), RAID 5 and RAID 10 (these options will only appear if three or four SATA drives are installed respectively). Press once you have selected the RAID LEVEL. 4. Select the drives to be used in the RAID array (only if there are more than two drives available) and press . 5. Select the strip size, if necessary, and press . 6. Enter the size of the volume (if you enter less than the maximum volume size, you can then create a second RAID array on the remaining portion of your volume) and press . 7. Finally, press to Create Volume. 8. Exit the Option ROM user interface by pressing or going to the EXIT option in the MAIN MENU. 57

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
57
4 Configuring Intel
®
Matrix Storage
Technology (RAID)
Requires Serial ATA (SATA) Hard Drives
Configuring the BIOS for Intel Matrix Storage Technology
1.
Assemble your system and attach one or more
SATA hard drives.
2.
Enter system BIOS Setup by pressing the <F2> key after the Power-On-Self-Test (POST)
memory tests begin.
3.
Go to
Advanced
Æ
Drive Configuration
Æ
Configure SATA as
; ensure
RAID
is selected.
4.
Then save your settings by pressing <F10>.
Creating Your RAID Set (for systems with more than one
SATA hard drive)
1.
Upon re-boot, you will see the following Intel Matrix Storage Manager option ROM status
message on the screen:
Press
<Ctrl-I>
to enter the RAID Configuration Utility.
Press
<Ctrl-I>
and enter the RAID Configuration Utility.
2.
In the Intel Matrix Storage Manager option ROM Main Menu, select option #1:
Create
RAID Volume
.
Enter a volume name and press <Enter>.
NOTE:
The RAID Volume name must be in English alphanumeric ASCII characters.
3.
Use the arrow keys to select RAID 0 or RAID 1 (if only two SATA drives are available),
RAID 5 and RAID 10 (these options will only appear if three or four SATA drives are installed
respectively).
Press <Enter> once you have selected the RAID LEVEL.
4.
Select the drives to be used in the RAID array (only if there are more than two drives available)
and press <Enter>.
5.
Select the strip size, if necessary, and press <Enter>.
6.
Enter the size of the volume (if you enter less than the maximum volume size, you can then
create a second RAID array on the remaining portion of your volume) and press <Enter>.
7.
Finally, press <Enter> to
Create Volume
.
8.
Exit the Option ROM user interface by pressing <Esc> or going to the EXIT option in the
MAIN MENU.