Intel DG41KR Product Specification - Page 25
Audio Subsystem Software, Audio Connectors and Headers
View all Intel DG41KR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
Product Description 1.10.1 Audio Subsystem Software Audio software and drivers are available from Intel's World Wide Web site. For information about Obtaining audio software and drivers Refer to Section 1.2, page 14 1.10.2 Audio Connectors and Headers The board contains audio connectors on the back panel and audio headers on the component side of the board. The front panel audio header provides mic in and line out signals for the front panel. Microphone bias is supported for both the front and back panel microphone connectors. The front panel audio header and back panel audio connectors are configurable through the audio device drivers. The available configurable back panel audio connectors are shown in Figure 4. Item A B C D E F Description Surround left/right channel audio out/retasking jack Center channel and LFE (subwoofer) audio out Line in Line out Mic in S/PDIF digital audio out (optical) Figure 4. Back Panel Audio Connector Options NOTE The back panel audio line out connector is designed to power headphones or amplified speakers only. Poor audio quality occurs if passive (non-amplified) speakers are connected to this output. For information about The location of the front panel audio header The signal names of the front panel audio header The back panel audio connectors Refer to Figure 10, page 44 Table 17, page 47 Section 2.2.1, page 43 25