Intel DG41KR Product Specification - Page 71
Error Messages and Beep Codes
View all Intel DG41KR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 71 highlights
4 Error Messages and Beep Codes 4.1 Speaker The board-mounted speaker provides audible error code (beep code) information during POST. For information about The location of the onboard speaker Refer to Figure 1, page 11 4.2 BIOS Beep Codes Whenever a recoverable error occurs during POST, the BIOS causes the board's speaker to beep an error message describing the problem (see Table 35). Table 35. BIOS Beep Codes Type Pattern Frequency Processor initialization complete One 0.5 second beep when the CPU initialization 3270 Hz process completes. POST complete BIOS update in progress Video error Memory error Thermal trip warning One 0.5 second beep when POST completes. None On-off (0.5 seconds each) two times, then 3.0 second pause (off), entire pattern repeats (beeps and pause) until the system is powered off. On-off (0.5 seconds each) three times, then 3.0 second pause (off), entire pattern repeats (beeps and pause) until the system is powered off. On-off (0.5 seconds each) four times, then 3.0 second pause (off), entire pattern repeats (beeps and pause) until the sixteenth beep, then ends. 3270 Hz 3270 Hz When no VGA option ROM is found. 1280 Hz 1280 Hz 71