Intel DG41TX Product Specification - Page 23
Real-Time Clock Subsystem, Legacy I/O Controller - memory support
View all Intel DG41TX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
Product Description 1.8 Real-Time Clock Subsystem A coin-cell battery (CR2032) powers the real-time clock and CMOS memory. When the computer is not plugged into a wall socket, the battery has an estimated life of three years. When the computer is plugged in, the standby current from the power supply extends the life of the battery. The clock is accurate to ± 13 minutes/year at 25 ºC with 3.3 VSB applied. NOTE If the battery and AC power fail, custom defaults, if previously saved, will be loaded into CMOS RAM at power-on. When the voltage drops below a certain level, the BIOS Setup program settings stored in CMOS RAM (for example, the date and time) might not be accurate. Replace the battery with an equivalent one. Figure 1 on page 11 shows the location of the battery. 1.9 Legacy I/O Controller The I/O controller provides the following features: • One serial port header • Serial IRQ interface compatible with serialized IRQ support for PCI systems • PS/2-style keyboard/mouse interfaces • One parallel port back panel connector • Intelligent power management, including a programmable wake-up event interface • PCI power management support The BIOS Setup program provides configuration options for the I/O controller. 1.9.1 Serial Port Interface The serial port header is located on the component side of the board. The serial port supports data transfers at speeds up to 115.2 kbits/s with BIOS support. For information about The location of the serial port header The serial port header signal mapping Refer to Figure 10, page 44 Table 12, page 46 23