Intel DG41TX Product Specification - Page 53
Jumper Block
View all Intel DG41TX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
Technical Reference 2.3 Jumper Block CAUTION Do not move the jumper with the power on. Always turn off the power and unplug the power cord from the computer before changing a jumper setting. Otherwise, the board could be damaged. Figure 13 shows the location of the jumper block. The jumper determines the BIOS Setup program's mode. Table 26 lists the jumper settings for the three modes: normal, configure, and recovery. When the jumper is set to configure mode and the computer is powered-up, the BIOS compares the processor version and the microcode version in the BIOS and reports if the two match. Figure 13. Location of the Jumper Block 53
Technical Reference
53
2.3
Jumper Block
CAUTION
Do not move the jumper with the power on. Always turn off the power and unplug the
power cord from the computer before changing a jumper setting.
Otherwise, the
board could be damaged.
Figure 13 shows the location of the jumper block.
The jumper determines the BIOS
Setup program’s mode.
Table 26 lists the jumper settings for the three modes:
normal, configure, and recovery.
When the jumper is set to configure mode and the
computer is powered-up, the BIOS compares the processor version and the microcode
version in the BIOS and reports if the two match.
Figure 13.
Location of the Jumper Block