Intel DH77DF Technical Product Specification - Page 62
Electrical Considerations - ram
View all Intel DH77DF manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
Intel Desktop Board DH77DF Technical Product Specification 2.5 Electrical Considerations 2.5.1 Power Supply Considerations CAUTION The +5 V standby line from the power supply must be capable of providing adequate +5 V standby current. Failure to do so can damage the power supply. The total amount of standby current required depends on the wake devices supported and manufacturing options. Additional power required will depend on configurations chosen by the integrator. The power supply must comply with the indicated parameters of the ATX form factor specification. • The potential relation between 3.3 V DC and +5 V DC power rails • The current capability of the +5 VSB line • All timing parameters • All voltage tolerances For example, for a high power system consisting of a supported 95 W processor (see Section 1.3 on page 17 for a list of supported processors), 4 GB DDR3 RAM, one high end video card, one hard disk drive, one optical drive, and all board peripherals enabled, the minimum recommended power supply is 460 W. Table 37 lists possible recommended power supply current rail values. Table 37. Recommended Power Supply Current Values (High Power) Output Voltage 3.3 V 5 V 12 V1 12 V2 -12 V 5 VSB Current 22 A 20 A 20 A 20 A 0.3 A 2.5 A For example, for a low power system consisting of a supported 35 W processor (see Section 1.3 on page 17 for a list of supported processors), 2 GB DDR3 RAM, integrated graphics, one SSD, one optical drive, and no extra onboard peripherals enabled, the minimum recommended power supply is a 180 W. Table 38 lists possible recommended power supply current rail values. Note: If the correct power supply and system configuration is used, a smaller power supply will work. Table 38. Recommended Power Supply Current Values (Low Power) Output Voltage Current 3.3 V 16 A 5 V 16 A 12 V1 12 A 12 V2 N/A -12 V 0.3 A 5 VSB 1.5 A For information about Selecting an appropriate power supply Refer to http://support.intel.com/support/motherboards/desktop/sb /CS-026472.htm 62