Intel DP55KG Product Guide - Page 58
Connecting the Bluetooth Antenna,
UPC - 735858205979
View all Intel DP55KG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
Intel Desktop Board DP55KG Product Guide 1. Observe the precautions in "Before You Begin" on page 31. 2. Connect the 12 V processor core voltage power supply cable to the 2 x 4 pin connector (Figure 30, A). 3. Connect the main power supply cable to the 2 x 12 pin connector (Figure 30, C). 4. If additional power is required for graphics cards, connect the appropriate power supply cable to the SATA-style PCI Express graphics auxiliary power connector (Figure 30, B). Connecting the Bluetooth Antenna A Bluetooth antenna is provided with the desktop board. In order to communicate with Bluetooth-enabled devices, you must connect the antenna to the onboard Bluetooth module. Follow the steps below to connect the antenna to the onboard Bluetooth module. 1. Observe the precautions in "Before You Begin" on page 31. 2. Attach the connector on the end of the antenna lead wire (Figure 31, B) to the mating connector on the Bluetooth module (Figure 31, A). 3. Remove the paper backing from the antenna (Figure 31, C) and attach it to the exterior of the system chassis. Figure 31. Connecting the Bluetooth Antenna 58