Intel DQ67EP Product Specification - Page 21
Legacy I/O Controller - raid
View all Intel DQ67EP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
Product Description 1.9.1.2 Intel® Rapid Recover Technology The board incorporates the Intel® Rapid Recover Technology (Intel® RRT). Intel Rapid Recover Technology is a feature of Intel Rapid Storage Technology. It uses RAID 1 (mirroring) functionality to copy data from a designated master drive to a designated recovery drive. The master drive data can be copied to the recovery drive either continuously or on request. When using the continuous update policy, changes made to the data on the master drive while the recovery drive is disconnected or offline are automatically copied to the recovery drive when it is reconnected. When using the on request update policy, the master drive data can be restored to a previous state by copying the data on the recovery drive back to the master drive. For information about Intel Rapid Recovery Technology Refer to http://www.intel.com/support/chipsets/ imsm/sb/CS-026142.htm 1.10 Legacy I/O Controller The Legacy I/O Controller provides the following features: • One serial port • Serial IRQ interface compatible with serialized IRQ support for PCI Conventional bus systems • Intelligent power management, including a programmable wake-up event interface • PCI Conventional bus power management support The BIOS Setup program provides configuration options for the Legacy I/O controller. 1.10.1 Serial Port The serial port is implemented as a 10-pin header on the board. The serial port supports data transfers at speeds up to 115.2 kbits/s with BIOS support. For information about The location of the serial port header Refer to Figure 10, page 45 21