Intel DQ67EP Product Specification - Page 53
Front Panel USB Headers, 2.2.7, Low Pin Count LPC Debug Connector
View all Intel DQ67EP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
Technical Reference 2.2.2.6 Front Panel USB Headers Figure 12 is a connection diagram for the front panel USB headers. NOTE • The +5 V DC power on the USB headers is fused. • Use only a front panel USB connector that conforms to the USB 2.0 specification for high-speed USB devices. Figure 12. Connection Diagram for Front Panel USB Headers 2.2.2.7 Low Pin Count (LPC) Debug Connector During the POST, the BIOS generates diagnostic progress codes (POST codes) to I/O port 80h. If the POST fails, execution stops and the last POST code generated is left at port 80h. This code is useful for determining the point where an error occurred. Displaying the POST codes requires a POST card that can interface with the Low Pin Count (LPC) Debug connector. The POST card can decode the port and display the contents on a medium such as a seven-segment display. Table 24. LPC Debug Connector Pin Signal Name Pin 1 VCC3 2 3 PLTRST_N 4 5 LAD0/FWH0 6 7 LAD2/FWH2 8 9 LFRAME_N/FWH4 10 11 GND Signal Name VCC3 LPC_CLK LAD1/FWH1 LAD3/FWH3 GND 53