Intel ISP4400 Quick Start Guide - Page 12
WARNING, CAUTION, When you depress the latch
View all Intel ISP4400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
The inner member has a safety latch shown in Figure 4. Without fully extending the slide assembly, you can move the server in and out from the rack. When the slide assembly is fully extended, this latch locks the assembly in the fully extended position. When you depress the latch, you can release the inner member from the rest of the slide assembly. C B A A. Inner member B. Safety latch C. Intermediate member OM09983 Figure 4. Safety Latch The inner member is the narrowest piece of the slide assembly. The inner member is attached to the chassis. The safety latch is located on the inner member. The intermediate member slides into the inner member. WARNING ANCHOR THE EQUIPMENT RACK: You must anchor the equipment rack to an unmovable support to prevent it from falling over when the server is pulled to the front on the slide assembly. The anchors must be able to withstand a force of up to 113 kg (250 lbs). You must also consider the weight of any other device installed in the rack. CAUTION After completing the rack mount installation, do not depress the safety latch unless you are removing the chassis from the rack. The purpose of the safety latch is to prevent the server from unexpectedly sliding out of the rack. 12 Quick Start Guide