Intel S5000PSLSAS Configuration Guide - Page 12
Production Configuration - driver
View all Intel S5000PSLSAS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Production Configuration This section contains information needed to order and configure the Intel® Server Chassis SC5400 and Intel® Server Chassis SC5299 KDKs with Intel® Server Board families S5000PSL, S5000XSL, and S5000XVN. 1) Production-boxed Intel Server Boards contain the following: One baseboard with Common Enabling Kit (CEK) spring clips ATX I/O shield, bumper, and label Cables: One IDE cable One Serial B (COM2) cable Six (6) SAS/SATA cables for "SATA" SKU Two (2) SAS/SATA cables for "SAS" SKU Two (2) SAS/SATA cables One 4-port SAS/SATA "octopus" cable for other SKUs Resource CD-ROM with utilities, drivers, documentation, and technical information Compatible with Intel® Xeon® processor 5000 sequence 2) Production OEM 10-packs of Intel Server Boards contain the following: One baseboard with Common Enabling Kit (CEK) spring clips Compatible with Intel® Xeon® processor 5000 sequence 3) The production SC5400LXi KDK includes the same as features as the SC5400LX below as well as: Redundant (1+0) 830W PFC power supply with dual-line cord support and includes an additional 830-W module for redundancy Includes a 6-drive hot-swap, non-expanded, SATA/SAS supported backplane assembly. One AC power cord is included only in SC5400LXINA 4) The production SC5400LX KDK includes: Redundant (1+0) 830-W PFC power supply with dual-line cord support (full redundancy requires an additional 830-W module, which you must purchase separately) Four redundant, hot-swap fans and ducting Support for six, tool-free non-hot-swap hard drives. Upgradeable to ten cabled or ten (6+4 configuration) hot-swap SAS or SATA drives. Cables (one each): Front Panel Cable (baseboard header to front panel) USB Cable (USB header to chassis front panel) Pre-routed IDE cable COM2 Cable AC power cord is included only in SC5400LXNA 12