Intel S5000PSLSAS Configuration Guide - Page 13

The Intel® Server Chassis SC5400 is designed to work with boxed Intel® Xeon® processor 5000 sequence using a 2U passive heat-sink. 5) The production SC5400BRP KDK includes:  Redundant (1+0) 830-W PFC power supply with dual-line cord support (full redundancy requires an additional 830-W module, which you must purchase separately)  Two non-redundant cooling fans  Support for six tool-free non hot-swap hard drives. Upgradeable to ten cabled or ten (6+4 configuration) hot- swap SAS or SATA drives.  Cables (one each):  Front Panel Cable (baseboard header to front panel)  USB Cable (USB header to chassis front panel)  Pre-routed IDE cable  COM2 Cable  AC power cord is included only in SC5400BRPNA The Intel® Server Chassis SC5400 is designed to work with the boxed Intel® Xeon® processor 5000 sequence using a 2U passive heat sink. 6) The production SC5400 Base KDK includes:  Non-redundant 670-W PFC power supply  Two non-redundant cooling fans  Support for six tool free non hot-swap hard drives. Upgradeable to six hot-swap SAS or SATA.  Quick start guide  Cables (one each):  Front Panel Cable (baseboard header to front panel)  USB Cable (USB header to chassis front panel)  Pre-routed IDE cables  COM2 Cable  AC power cord is included only with SC5400BASENA The Intel® Server Chassis SC5400BASE is designed to work with the boxed Intel® Xeon® processor 5000 sequence using a 2U passive heat sink. 7) The production SC5299WS SKU includes:  Non-redundant 670-W PFC power supply  Two non-redundant cooling fans with ducting  Support for six tool-free non hot-swap hard drives. Upgradeable to hot swap SAS/SATA 6-drive bay.  Cables (one each):  Front Panel Cable (USB header t chassis front panel)  USB Cable (USB header to chassis front panel)  AC power cord is included in SC5299WSNA 13