Intel S5000PSLSAS Configuration Guide - Page 14

 Chassis intrusion switch assembly  The chassis is designed to work with the boxed Intel® Xeon® processor 5000 sequence using an active heat sink. 8) The production SC5299DP SKU includes:  Non-redundant 550-W PFC power supply  One non-redundant cooling fan  Support for six, tool-free non-hot-swap hard drives. Upgradeable to hot swap SAS/SATA 6-drive bay. Note: Check the Power budget spreadsheet for supportable hard drive, memory, and PCI configurations.  Cables (one each):  Front Panel Cable (USB header t chassis front panel)  USB Cable (USB header to chassis front panel)  AC power cord is included in SC5299DPNA  Chassis intrusion switch assembly  The chassis is designed to work with the boxed Intel® Xeon® processor 5000 sequence using an active heat-sink. 9) The production SC5299BRP SKU includes:  Redundant (1+0) 650-W PFC power supply with dual-line cord support (full redundancy requires an additional 650-W module, which you must purchase separately)  One non-redundant cooling fan  Support for six, tool-free non-hot-swap hard drives. Upgradeable to hot swap SAS/SATA 6-drive bay.  Cables (one each):  Front Panel Cable (USB header t chassis front panel)  USB Cable (USB header to chassis front panel)  AC power cord is included in SC5299BRPNA  Chassis intrusion switch assembly  The chassis is designed to work with the boxed Intel® Xeon® processor 5000 sequence using an active heat sink. 10) Common accessories include: Hot Swap Drive Bays: - AXX6DRV3GEXP: Expander-based 6-drive bay that supports SAS/SATA drives. Requires two free SAS ports from the integrated SAS controller, ROMB Card, or SAS RAID card. - AXX4DRV3GEXP: Expander-based 4-drive bay that supports SAS/SATA drives. Requires two free SAS ports from the integrated SAS controller, ROMB Card, or SAS RAID card. Only supported in the Intel® Server Chassis SC5400 chassis family. - AXX6DRV3G: 6-drive bay that supports SAS/SATA drives. Requires six free SAS or SATA ports. SAS hard drive support requires SAS connectors from a SAS enabled board SKU or SAS RAID Card. Not supported with S5000PSLROMB or the SRCSAS144E RAID card. - AXX4DRV3G: 4-drive bay that supports SAS/SATA drives. Requires four free SAS or SATA ports. SAS hard drive support requires SAS connectors from a SAS enabled board SKU or SAS RAID Card. Only supported in SC5400 chassis family and not supported with S5000PSLROMB or the SRCSAS144E RAID card. 14