Intel S5500HCV Service Guide - Page 40
Installing the Processor Heatsinks
UPC - 735858207508
View all Intel S5500HCV manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
Hardware Installations and Upgrades Figure 17. Install the processor 11. Close the load plate and socket lever: Close the load plate all the way as shown in Figure 18 (Step "A"), push down on the load plate (Step "B" in Figure 18), and close the socket lever and ensure the load plate tab engages under the socket lever when fully closed (Step "C" in Figure 18). Figure 18. Close Load Plate and Socket Lever 12. Install the heatsink(s). See "Installing the Processor Heatsink(s)" for instructions. Installing the Processor Heatsink(s) Selecting Processor Heatsink(s) Each processor requires a heatsink. Depending on your chassis, you may need to use either an active or a passive heatsink. An active heatsink has a fan attached to the heatsink and a cable that must be connected to the server board. The following table shows the Intel® Server Chassis compatible with this server board and whether each chassis requires an active or a passive heatsink. For a non-Intel chassis, see the documentation that came with your chassis. Intel® Server Board S5520HC and S5500HCV Service Guide 40