Invacare 9153637776 Owners Manual - Page 33

Adjusting Footplate Height

Get Invacare 9153637776 PDF manuals and user guides View all Invacare 9153637776 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 33 highlights

5.2 Adjusting Footplate Height Spring Button  This procedure applies to the swingaway front riggings and swingaway elevating legrest. 1. Remove the front rigging assembly. Refer to Installing/Removing Front Riggings on page 31.  Lay the front rigging assembly on a flat surface to simplify this procedure. 2. Pull the cam lock lever up to unlocked position.  The elevating legrest has two sets of release buttons, one set above the other. Each set will be visible one at a time allowing finer footplate height adjustment. 3. Push in the release buttons and reposition the footplate assembly to the desired height. 4. Ensure that the release buttons fully protrude from holes on both sides of the front rigging support. 5. Rotate cam lock lever down to locked position. 6. Repeat this procedure for the other footplate, if necessary. 7. Reinstall the swingaway front rigging assembly. Refer to Installing/ Removing Front Riggings on page 31. 5 FRONT RIGGINGS Front Rigging Support Adjustment Holes Cam Lock Lever Release Button Footplate Assembly  Swingaway footrest shown FIGURE 2 Adjusting Footplate Height - Spring Button Part No 1110546 33 Invacare® Tracer™ EX2 Wheelchair

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
5
FRONT RIGGINGS
Part No 1110546
33
Invacare
®
Tracer™ EX2 Wheelchair
5.2
Adjusting Footplate Height
Spring Button
1.
Remove the front rigging assembly. Refer to Installing/Removing
Front Riggings
on page 31.
2.
Pull the cam lock lever up to unlocked position.
3.
Push in the release buttons and reposition the footplate assembly
to the desired height.
4.
Ensure that the release buttons fully protrude from holes on both
sides of the front rigging support.
5.
Rotate cam lock lever down to locked position.
6.
Repeat this procedure for the other footplate, if necessary.
7.
Reinstall the swingaway front rigging assembly. Refer to Installing/
Removing Front Riggings
on page 31.
FIGURE 2
Adjusting Footplate Height - Spring Button
This procedure applies to the swingaway front riggings
and swingaway elevating legrest.
Lay the front rigging assembly on a flat surface to simplify
this procedure.
The elevating legrest has two sets of release buttons,
one set above the other. Each set will be visible one
at a time allowing finer footplate height adjustment.
Front Rigging Support
Release Button
Footplate
Assembly
Cam Lock Lever
Adjustment
Holes
Swingaway footrest shown