Invacare 9153637776 Owners Manual - Page 48
Replacing Rear Wheel Handrim
View all Invacare 9153637776 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
8 REAR WHEELS 8.3 Replacing Rear Wheel Handrim ƽ WARNING If the wheelchair is equipped with permanent axles, this procedure MUST be performed by a qualified technician. 1. Remove the rear wheel from the wheelchair. Refer to Removing/ Installing Rear Wheels on page 46. 2. Remove the mounting screws that secure the handrim to rear wheel. 3. Remove the existing handrim. 4. Secure the new handrim to the rear wheel with mounting screws. Tighten securely. ƽ WARNING Make sure the detent pin and detent balls of the quick-release axles are fully released and protruding out of the hole before operating the wheelchair. Keep detent balls clean. 5. Reinstall rear wheel to the wheelchair. Refer to Removing/Installing Rear Wheels on page 46. 6. Repeat STEPS 1-5 for the opposite rear wheel if necessary. Handrim Rear Wheel Mounting Screw FIGURE 2 Replacing Rear Wheel Handrim Invacare® Tracer™ EX2 Wheelchair 48 Part No 1110546