Invacare 9153637776 Owners Manual - Page 53

Adjusting the Anti-Tippers

Get Invacare 9153637776 PDF manuals and user guides View all Invacare 9153637776 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 53 highlights

10 ANTI-TIPPERS/WHEEL LOCKS  A 11/2 to 2 inch clearance between the bottom of the anti-tipper wheels and the ground/floor MUST be maintained at all times. 5. If the distance between the bottom of anti-tipper wheels and the ground/floor is not 11/2 to 2 inches, adjust anti-tippers. Refer to Adjusting the Anti-Tippers on page 53. Adjusting the Anti-Tippers  A 11/2 to 2 inch clearance between the bottom of the anti-tipper wheels and the ground/floor MUST be maintained at all times. 1. Place the wheelchair on a flat surface.  If adjusting anti-tippers on recliner models, ensure back canes are in the upright position before making adjustments. 2. Press the release buttons on the wheeled portion of the anti-tipper and slide it up or down to the desired adjustment hole. 3. Check to make sure that the release buttons are fully engaged in adjustment holes. 4. Ensure both anti-tippers are adjusted to the same height. 5. Measure the distance between the bottom of the anti-tipper wheels and the ground/floor. 6. If the distance between the bottom of anti-tipper wheels and the ground/floor is not 11/2 to 2 inches, repeat steps 2-5 until the distance is 11/2 to 2 inches. 7. If the 11/2 to 2 inch distance cannot be achieved, a different model may be required. Contact an Invacare dealer or qualified technician. Release Buttons 11/2 to 2 inch Clearance FIGURE 3 Adjusting the Anti-Tippers Part No 1110546 53 Invacare® Tracer™ EX2 Wheelchair

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
10
ANTI-TIPPERS/WHEEL LOCKS
Part No 1110546
53
Invacare
®
Tracer™ EX2 Wheelchair
5.
If the distance between the bottom of anti-tipper wheels and the ground/floor is not 1
1
/
2
to 2 inches, adjust anti-tippers. Refer to Adjusting the
Anti-Tippers
on page 53.
Adjusting the Anti-Tippers
1.
Place the wheelchair on a flat surface.
2.
Press the release buttons on the wheeled portion of the anti-tipper
and slide it up or down to the desired adjustment hole.
3.
Check to make sure that the release buttons are fully engaged in
adjustment holes.
4.
Ensure both anti-tippers are adjusted to the same height.
5.
Measure the distance between the bottom of the anti-tipper wheels
and the ground/floor.
6.
If the distance between the bottom of anti-tipper wheels and the
ground/floor is not 1
1
/
2
to 2 inches, repeat steps 2-5 until the
distance is 1
1
/
2
to 2 inches.
7.
If the 1
1
/
2
to 2 inch distance cannot be achieved, a different model
may be required. Contact an Invacare dealer or qualified technician.
FIGURE 3
Adjusting the Anti-Tippers
A 1
1
/
2
to 2 inch clearance between the bottom of the anti-tipper wheels and the ground/floor MUST be maintained at all times.
A 1
1
/
2
to 2 inch clearance between the bottom of the anti-tipper wheels and the ground/floor MUST be maintained at all times.
If adjusting anti-tippers on recliner models, ensure back
canes are in the upright position before making
adjustments.
Release Buttons
1
1
/
2
to 2 inch Clearance