Invacare BAR750 User Manual - Page 17

Unlock the casters on the foot-end

Get Invacare BAR750 PDF manuals and user guides View all Invacare BAR750 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 17 highlights

4. Grasp the back-rest of head-end section and rotate it until the section rests on the frame section already on floor. Setup 9. Remove the clevis pin C securing the shipping bracket to foot-end section from each side of the foot-end section. 5. Locate two clevis pins C (one each side of bed) on backrest of head-end section which connect shipping brace to bed. 10. Remove shipping bracket and two cardboard support blocks from foot-end bed section. 11. Unlock the casters on the foot-end section. 12. Place power supply cord and handset on top of the bed. 13. Carefully roll the foot-end section off the pallet. 14. Slide head-end section D into foot-end section E until the side frame holes F line up. 6. Remove the clevis pin from the bed and packing brace. 7. Repeat STEP 6 and 7 for the other side. Save clevis pins to assemble the bed. 8. Pull the head-end section from the shipping bracket. 1143215-B-01 17

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
Setup
4.
Grasp the back-rest of head-end section and rotate it until the
section rests on the frame section already on floor.
5.
Locate two clevis pins
C
(one each side of bed) on backrest of
head-end section which connect shipping brace to bed.
6.
Remove the clevis pin from the bed and packing brace.
7.
Repeat STEP 6 and 7 for the other side.
Save clevis pins to assemble the bed.
8.
Pull the head-end section from the shipping bracket.
9.
Remove the clevis pin
C
securing the shipping bracket to
foot-end section from each side of the foot-end section.
10. Remove shipping bracket and two cardboard support blocks
from foot-end bed section.
11. Unlock the casters on the foot-end section.
12. Place power supply cord and handset on top of the bed.
13. Carefully roll the foot-end section off the pallet.
14. Slide head-end section
D
into foot-end section
E
until the side
frame holes
F
line up.
1143215-B-01
17