Invacare BAR750 User Manual - Page 20

Inspecting the Assembled Bed, Storing the Bed

Page 20 highlights

Invacare® Bariatric Bed 4. Repeat STEPS 1 to 3 for the other four side sections E on that side of the bed. 5. Repeat STEPS 1 to 4 for the other side of the bed. 4.6 Inspecting the Assembled Bed Examine each item carefully for scratches, nicks, dents or any other apparent damage. Check all parts for shipping damage. In case of shipping damage, DO NOT use. Contact Dealer/Carrier for further instruction. 1. Inspect the power supply cord and cables for cuts or damage to the cord and/or plug. 2. Inspect the junction box for any damage to the connectors. 3. Ensure that the motor plugs are plugged into the junction box and fit properly. 4. Do a careful inspection of the bed. Look underneath the bed to make sure there is nothing stored there. This area MUST be kept clear to avoid any interference with bed parts, which move during operation. 5. Lock the casters. Refer to the Steering the Bed section. 20 6. Plug the power cord into a 120 volt grounded socket with a capacity of at least 15 amperes. Using the handset, cycle the bed through all of its operations. Make sure that everyone (including you) is clear of the bed during these operations. Ensure that: a. All power bed operations work smoothly and stop in any desired position. b. Bed height, angle of the leg lift and backrest can be adjusted properly. 7. Position the side rails, be sure they slide up and down properly. 8. When you are satisfied that the bed is operating properly, instruct all personnel who may be involved in the bed operation. 4.7 Storing the Bed WARNING! Risk of Injury or Damage To avoid product damage and personal injury: - DO NOT place other objects on top of the cartons. WARNING! Risk of Injury or Damage To avoid product damage and personal injury: - Disconnect pendant when not in use and store out of reach of children. If bed is not being assembled immediately, retain the cartons and packaging for storage until ready for assembly. Store the Invacare bed in a dry area. 1143215-B-01

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36

Invacare® Bariatric Bed
4.
Repeat STEPS 1 to 3 for the other four side sections
E
on that
side of the bed.
5.
Repeat STEPS 1 to 4 for the other side of the bed.
4.6
Inspecting the Assembled Bed
Examine each item carefully for scratches, nicks, dents or any other
apparent damage.
Check all parts for shipping damage. In case of shipping
damage, DO NOT use. Contact Dealer/Carrier for further
instruction.
1.
Inspect the power supply cord and cables for cuts or damage
to the cord and/or plug.
2.
Inspect the junction box for any damage to the connectors.
3.
Ensure that the motor plugs are plugged into the junction box
and fit properly.
4.
Do a careful inspection of the bed. Look underneath the bed to
make sure there is nothing stored there. This area MUST be
kept clear to avoid any interference with bed parts, which move
during operation.
5.
Lock the casters. Refer to the Steering the Bed section.
6.
Plug the power cord into a 120 volt grounded socket with a
capacity of at least 15 amperes. Using the handset, cycle the bed
through all of its operations. Make sure that everyone (including
you) is clear of the bed during these operations. Ensure that:
a.
All power bed operations work smoothly and stop in any
desired position.
b.
Bed height, angle of the leg lift and backrest can be adjusted
properly.
7.
Position the side rails, be sure they slide up and down properly.
8.
When you are satisfied that the bed is operating properly,
instruct all personnel who may be involved in the bed operation.
4.7
Storing the Bed
WARNING!
Risk of Injury or Damage
To avoid product damage and personal injury:
DO NOT place other objects on top of the cartons.
WARNING!
Risk of Injury or Damage
To avoid product damage and personal injury:
Disconnect pendant when not in use and store out
of reach of children.
If bed is not being assembled immediately, retain the cartons and
packaging for storage until ready for assembly.
Store the Invacare bed in a dry area.
20
1143215-B-01