Invacare BAR750 User Manual - Page 28
Maintenance and Cleaning Checklist
View all Invacare BAR750 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
Invacare® Bariatric Bed 1. Stand or prop each bed end in an upright position on its legs. 2. Using a mild soap/detergent and soft bristle brush or sponge, scrub all exterior surfaces. 3. Using a hose and nozzle attachment, rinse bed ends thoroughly with plain cold or warm water. Do not exceed a water temperature of 110° F. Use household tap pressure. DO NOT use pressure washers or steam cleaners. 4. Tip bed end from side to side to allow any collected or trapped water to drain. 5. Thoroughly towel dry bed end and all components. 6. Repeat drying process until all components are dry. Ensure that the bed end is completely dry before storing. Cleaning the Head and Foot Sections 1. Unplug the power cord of electric beds before performing maintenance. 2. Wipe down the bed with disinfectant. Allow it to dry completely. 6.4 Maintenance and Cleaning Checklist Invacare recommends the following maintenance/cleaning procedures be conducted initially, between users, or as needed. This form is provided as a guide to help with documentation. WARNING! Risk of Injury or Damage To avoid injury or damage from misuse: - Read all guidelines, warnings and cautions before performing any repairs/maintenance on the bed. - All repair and maintenance on the bed should be performed by a qualified technician. Cleaning and Disinfecting Bed q Unplug the power cord of electric beds before performing maintenance. q Wipe down with disinfectant. Allow to dry completely. 28 1143215-B-01