Invacare CRFTI Owners Manual - Page 53
Removing/Installing/Repositioning the Caster Assemblies, Standard Forks, Removing Front Caster
View all Invacare CRFTI manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
SECTION 8-WHEELS Removing/Installing/Repositioning the Caster Assemblies NOTE: If replacing a front caster note the mounting position of the existing front caster for installation of the new front caster. NOTE: Both front casters MUST be the same size and adjusted to the same height. Standard Forks NOTE: For this procedure, refer to FIGURE 8.15. Fork Removing Front Caster 1. Remove the mounting bolt, axle spacers and locknut that secure the front caster to the fork. 2. Remove the caster from the fork. Installing Front Caster 1. Using the mounting bolt, axle spacers and locknut, secure the caster to the desired caster mounting position. Mounting Bolt Locknut Caster Axle Spacer Axle Spacer FIGURE 8.15 Removing/Installing/Repositi oning the Caster Assemblies - Standard Forks Suspension Forks NOTE: For this procedure, refer to FIGURE 8.16 on page 54. Removing the Caster NOTE: One mounting screw will not turn. 1. Using two allen wrenches, turn mounting screws in opposite directions and remove one mounting screw from fork. 2. Remove the threaded bushing with mounting screw and two spacers securing the caster to the fork. DO NOT use excessive force. 3. Remove the caster from the fork. Part No 1134872 53 Crossfire™Series Wheelchairs